i use a paintball regulator and tank but the last 2 times i tryed the glue was either wet still or there was no glue on one joint so it shot apart, now im scared that it will explode all my pvc is pressure rated to at least 280 and im only aiming for 120, but im really scared now

Nice cannon feathers, I'm not going to rant about DWV (its been done (above)) I've built an under over with that kind of sprinkler valve. For opening the valve, you will probably need at least 24 volts of power going through that push button, so 3 9v would be sufficient. On a different note, I love...

ok i will look into it

i know the chamber is rated to 280 psi but does any one know if the 1 inch is different, i just dont feel safe when i air this up

i read your accident thats pretty bad

no i talked to him mine is different its a diaphram antisiphon and he said it would be fine

i tried to pressurize my cannon today and the pvc glue wasnt dry in my paintball store with my boss the end cap flew of and the cannon hit me in the stomach and made a big mess of paper on the counter it was only at 110 psi too

wont that spark

edit: do you tape the intake or inside the tubes going to your filter

oh i didnt know you made yours... i just bougth mine to mess around with at the paintball field i work at

take it to a paintball field thell let you chrono it

i have this one its way cool shoots like a 15 foot radius of what ever you fill it with

oh ok your probably shooting in the upper 200s fps paintball guns operate off like 150-220 psi

do you know the fps, is that a fill nipple on the chamber, do you have a problem opening the valve fast enough, how much psi in the chamber

this is great ill try it in my mitsubishi montero im doing like 15mpg on a v6 my car is awful

so to reset the computer what do you do exactly

yeah im kinda a noob to cannon making but im really good with paintball guns and i saw one like this on the internet so i tried to build it. i will use a momentary button from radioshack and a battery harness (probably 2 9v) in a project enclosure today i got finished with it except for the switch w...

well heres a pic of what my cannon will look like here its just layed together i need to drill and tap my pvc and use a deadhead to see what my reg is at http://img12.imageshack.us/img12/941/image005gcz.jpg im thinking of switching from steel braided hose to paintball macroline cause its more flexib...

i just have a very simple pvc grill starter gun and its really loud to shoot i thought about copying the porting on my paintball barrel, but my friend told me it would shred the potato