Thanks for the information, I've seen coaxial all over the forum but couldnt find this info. Muzzle loading a pressurised system seems nowhere near safe.. but the one in the youtube video i earlier posted looks like it can be modified for a breech load. To be sure, can we say the break barrel air ri...

Ragnarok wrote:I'm not entirely sure. It's possible it's a coaxial configuration.

sorry but this is where i have to ask, what actually is a coaxial config and how it Works..?

Mates i was searching for homemaid airguns on youtube and ound something interesting here; https://www.youtube.com/watch?v=is4tJXlDxqM but couldnt understand where this one stores the compressed air, does it store it in the hose..? is it even safe..? :) btw if anyone can understand how it works can ...

thats nice thanks for the info, btw the more i looked at your design the more i liked it.
Do you think a cylinder can fill a 100-150cc air chamber to 130psi by pumping..?
İ don't know how to do it but this may lead to a semi auto.

my idea is a little bit different do you have a software to draw these or are you drawing in paint..?
btw sorry but i have to ask, do you have any equipment to try this..?, i need someone to tell it works..

Hello there, after Gippeto's opinion i am thinking of making the pump myself
Guess it'll be the first finished part.

Thanks for your interest, hope I can get this project to an end, the idea was simply a pellet or bb gun like pcp but without the "pre" charged side. So it needs a pump within. Like the one you posted, the 1377 or p17 or the one with Zoraki hp01. (BTW I really like the design and working principle of...

btw i checked again the calculation for a 3/4" bore diameter and 130psi pressure it needs 57lbs and 3:1 lever would be fairly easy to cock the system. Theres one more thing here, to achieve a 130psi compressed air with 3/4" bore and 4" stroke length a 8,96552 mechanical compression ratio is required...

That 22kg with a 4:1 lever would only be a little over 5kg. Have the P17 back together and will bring it in to test on the scale. I realised that my earlier calculation is wrong, 1" bore makes 0.785in2 bore area and to get 150 psi it needs 117.75lb which makes 53kg.. That would need 10:1 lever to p...

Can't say if it's correct or not but the first idea I had was similar to this. Later on Gippeto said that the Beeman p17 is a simple cylinder and a rod pump with a chamber and valve at the end. At first I'll try to make a prototype replication of the p17 with compression chamber within the pump and ...

Now i have an idea about how to make the pump and the compression chamber its way easier than i thought but more questions are comming I thought a qev should be between the compression chamber and the pump doesn't it..? (that way the system may also allow multi pump action) For a simple start if i p...

I actually know the formulas but we use metric system here in Turkey so it's a bit confusing each time calculating the imperial units. For an example if i use a 1" bore and 4" stroke lenght my cylinder volume will be 3,14cu in and if i want to get 150psi from this cylinder its gonna be 150/3,14 = 47...

I really don't know what type of parts to use and how to connect them into a pneumatic launcher so in this state I can't even draw anything about the design. I actually hope to find answers here. (BTW I can work with wood so after I know how the working pneumatics look like together, I will surely d...

First of all i want to thank you for your interest, didn't thought someone to be involved at all. i have to say i am new to pneumatics and actually dont have an idea about how to replicate the single stroke system in p17. I guess the small chamber at the end of the rod is where the compressed air is...

Thnx Gippeto

Now that compressing the skirts of pellets is an issue i may switch to bb's.
and now what i have to ask is, how can i replicate the air compression source in the beeman p17