Damn man that whole rifle looks great. Nice silencer too, great workmanship

Dude, that guy was in inspiration for me to build my own inline vortex. All I did was make it a bullpup with the block in the rear. That dude is awsome.

To sum up the details of the vortex block: 1. Length is about 4 inches back to front 2. Diameter is just under 1.5 inches 3. Vortex hole is 3/4 inch 4. Block is sealed with O ring. 5. Front of block is tapered down to 1/2 inch for side feeding of bbs. 6. skirt was tried but caused misfeeding. 7. Ins...

pic 3 vortex off angle

pic 2 vortex block

pics. I do not know how to get them all in one post so they are in several

Yeah the resevoir is being changed out to only 10 inches long this coming week. I just need to get off my butt to do it :) Yeah my barrel is something like 6.06 or something like that. Loose in other words. Brake line it is. Been hectic busy this moring so I still have to get pics done as soon as I ...

standard aluminium tube. It was put on a lathe to trim it down at the receiver end to fit tight into the vortex block.

Maybe changing out to brakeline?

they need only light pressure to exit the barrel. Sometimes they do roll out, but that is with the very very cheap bbs.

oh and no nozzles since it has brass fittings on it. Or would it be internal to the blowgun?

A blow gun from home depot. It will drain the tank relatively quickly. 10 gallon from Lowes. I had thought that maybe the flow rate on the blow gun is way too low. But it will drop tank pressure from 160-80 psi in about 15 seconds. Almost all fittings are 1/4 inch brass. I have 2 compression fitting...

Thanks forgot to mention, the block is delrin (I splurged after reading these forums). pics will be up tomorrow.

Ok, I made an inline bullpup vortex airsoft cannon. Full block, fires around 3000 rpm from a 160 psi tank. Compressed air. Gun is 1.5 inches in diameter, 18 inches long, with a 24 inch aluminum barrel. Feeding issues: the block was too wide, solution was to grind down the block's sides to allow unob...