golf ball barrels
-
pyromanic13
- Corporal 5
- Posts: 913
- Joined: Wed Oct 19, 2005 7:54 pm
best sleeving I've ever seen
Movie dialogue: "The good die first."
Tom: "But most of us are morally ambiguous, which explains our random dying
patterns."
Tom: "But most of us are morally ambiguous, which explains our random dying
patterns."
-
medievalman
- Specialist 3
- Posts: 319
- Joined: Tue Dec 05, 2006 5:52 pm
- Location: Central Minnesota
- Contact:
looks great! how long did it take?
Join the AirAssault Army!
Welcome to Minnesota, Land of 10,000 Lakes, and 10,000,000,000 Mosquitoes.
Welcome to Minnesota, Land of 10,000 Lakes, and 10,000,000,000 Mosquitoes.
-
Legendpilot
- Private 4
- Posts: 66
- Joined: Wed Jan 03, 2007 5:52 pm
Thanks, it wasn't easy. It took me all of about an hour from beginning to end. Cutting, measuring, beating, ect. BTW, I used hose clamps to compress the cut piece which, I think, made my job easier. -Lp
-
medievalman
- Specialist 3
- Posts: 319
- Joined: Tue Dec 05, 2006 5:52 pm
- Location: Central Minnesota
- Contact:
how much of a gap did you cut out?(i want to make my own gf barrel)
Join the AirAssault Army!
Welcome to Minnesota, Land of 10,000 Lakes, and 10,000,000,000 Mosquitoes.
Welcome to Minnesota, Land of 10,000 Lakes, and 10,000,000,000 Mosquitoes.
-
Legendpilot
- Private 4
- Posts: 66
- Joined: Wed Jan 03, 2007 5:52 pm
I found a diagram that called for a 7/8" removal. I started with that and realized it wasn't going to work. I just trimmed it down from there. I probably took almost an inch out. Just make sure that your cut is straight, a noble task, and you'll have no problem. If like me you are even slightly off, the difficulty increases. -Lp
-
subterranean
- Specialist
- Posts: 171
- Joined: Sat Oct 21, 2006 11:39 am
- Location: columbus, ohio
instead of sleeving a barrel or buying golf ball barrels, ive found that a golf ball with out the plastic outer coating will fit in your standard sch40
1 1/2" pipe you can find any where. My question is does any one have a good way of "striping" the plastic off. i was only able to make one of these "modded" golf balls, and it was doe to the fact that it was so old that the plastic had dry rotted and began to crack off on its own.
1 1/2" pipe you can find any where. My question is does any one have a good way of "striping" the plastic off. i was only able to make one of these "modded" golf balls, and it was doe to the fact that it was so old that the plastic had dry rotted and began to crack off on its own.
-
subterranean
- Specialist
- Posts: 171
- Joined: Sat Oct 21, 2006 11:39 am
- Location: columbus, ohio
instead of sleeving a barrel or buying golf ball barrels, ive found that a golf ball with out the plastic outer coating will fit in your standard sch40
1 1/2" pipe you can find any where. My question is does any one have a good way of "striping" the plastic off. i was only able to make one of these "modded" golf balls, and it was doe to the fact that it was so old that the plastic had dry rotted and began to crack off on its own.
1 1/2" pipe you can find any where. My question is does any one have a good way of "striping" the plastic off. i was only able to make one of these "modded" golf balls, and it was doe to the fact that it was so old that the plastic had dry rotted and began to crack off on its own.
-
spudthug
- Corporal 5
- Posts: 936
- Joined: Mon Feb 26, 2007 9:02 pm
- Location: johnsonburg, Pa USA
- Contact:
sub u posted twice...but anyway ledgend im gonna do that some time make like the same as urs and put it on my next pneumatic...its gonna be pimp
4" piston valved cannon-half done..( i spilt my cement...)
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
Sorry to post on an old topic (well, if a month counts as old anyway), but I have a relevent question that doesn't really need its own thread.
Anyone ever used 1.5" Schedule 10 PVC for golf balls?
It has an ID of 1.682" (Calculated from data on http://en.wikipedia.org/wiki/Nominal_Pipe_Size) which seems like it would fit a golfball (1.68" diameter) better than SDR 21, which has an ID of 1.7".
Anyone ever used 1.5" Schedule 10 PVC for golf balls?
It has an ID of 1.682" (Calculated from data on http://en.wikipedia.org/wiki/Nominal_Pipe_Size) which seems like it would fit a golfball (1.68" diameter) better than SDR 21, which has an ID of 1.7".