SpudFiles

Anyone know what to use for a barrel that fits those air soft bb's? because i'm thinking of building a gun and using those air soft bb's as the bullet.

This question has been asked 23,907 times already, before you ask, SEARCH

take a bb to a hobby store and look for some brass tubes, find one that fits your ammo.

jackssmirkingrevenge wrote:This question has been asked 23,907 times already, before you ask, SEARCH

really? id say its closer to 27863. and really you should use the search, most people wont spoonfeed you, it really irritates them (to put it nicely)

5/16th brake lines,I'm in a good mood for spoon feeding or should I see poon feeding!

Go to your hardware store with some of the bb's you plan to use and find some brakeline that fits, or try brass telescoping (also alum.) from a hobby store. If not, just buy a real flipping airsoft barrel..It'll cost you a few dollars

Buy a tightbore barrel from an airsoft supplier such as:

http://www.airsoftpost.com/internal-par ... 24_72.html

http://www.airsoftgi.com/index.php?cPath=31_55

http://www.airsoftextreme.com/store/ind ... th=443_468

That's what will be the best fit-the actual item designed for your application!

Use a freaking pen, its cheap, reliable, and you can find them anywhere

a pen is 6 inches long not gona get good velocites unless you are using tons of psi like 1000psi if not buy a real barrel

Airsoft BB's are 6mm.

Anything that is 6.01mm - 6.15mm will be good for a barrel.. anything bigger and it has too much blowby.

i need to get a 6mm barrel i have 8mm barrel at 400psi i get 700 fps so yeah
i am broke right now, but once i get a barrel you'll see my sniper rifle

edit yes it actually has a rifled barrel