hey guys i had previously posted an idea for a airsoft style grenade(madbull)
but i scraped the idea after some helpful advise but i came up with two new different ideas one is a diaphragm release the other uses a hammer valve. i would appreciate advise on whether they would work or which one would be better with reasons why.
Airsoft shotgunshell/grenade 2?
-
whitexnightjp
- Private 3
- Posts: 42
- Joined: Sat Feb 13, 2010 11:35 am
- Attachments
-
- diaphragm
-
- hammer valve
- shotgun shell 1.3.png (35.37 KiB) Viewed 2283 times
its cheaper more powerful and louder to put a edited for content in a easter egg and fill with bbs
Edited by jrrdw stick to the posting rules twizi.
Edited by jrrdw stick to the posting rules twizi.
dont play with airsofter with 1000$ gun and play with a 5 dollar pair of glasses
-
whitexnightjp
- Private 3
- Posts: 42
- Joined: Sat Feb 13, 2010 11:35 am
how effective is that and also its not really styled like that its more like the madbull grenades that u put in a grenade launcher
-
whitexnightjp
- Private 3
- Posts: 42
- Joined: Sat Feb 13, 2010 11:35 am
have u ever hurt anyone from the egg shell shrapnel. I ask cuz there are sometimes little kids that play and i dont want them going home with chunks of egg in their arms
-
jrrdw
- Moderator
- Posts: 6572
- Joined: Wed Nov 16, 2005 5:11 pm
- Location: Maryland
- Has thanked: 39 times
- Been thanked: 22 times
- Contact:
Don't follow twizi's suggestion, it's dangerous at best, and in violation of the posting rules of the forum. Have you tested your idea in the diagram? The only trouble I'm thinking you might have is with the spring. BB's might get in the way of it's operation and it's looking kinda long to not be supported.whitexnightjp wrote:have u ever hurt anyone from the egg shell shrapnel. I ask cuz there are sometimes little kids that play and i dont want them going home with chunks of egg in their arms
A piece of spring steel across the bottom would avoid both the above potential problems...
-
whitexnightjp
- Private 3
- Posts: 42
- Joined: Sat Feb 13, 2010 11:35 am
the spring is only there to reset the hammer valve but there are two different diagrams so im guessing your talking about the 1st oneThe only trouble I'm thinking you might have is with the spring.
they will be resting in the barrels (which i didnt draw cuz im lazy) and the barrels will be on the outside of the tank (inbetween the outer pvc and the inner copper tanks(srry for not specifying that in the diagrams)BB's might get in the way of it's operation and it's looking kinda long to not be supported.