SpudFiles

As well as my muffler i did some buckshot shells, im gettin some more lead shot soon so they will be good

Things used;

-plain printer paper
-glue
-4mm bb's
-piece of barrel as a cast.
-scissors/knife

these group pretty well at 20m with 00 lead shot. not to sure on how plastic ones would go tho.

Looks cool man, does the shot come out in flight or upon impact? also would like to see your gun ( air or combustion ). btw i'm designing a double barrel pneumatic shotgun, this type of ammo would work perfect i think. thx for the pics.

yer ok here mah gun


they do come apart after firing not impact.

so double barrel are you also going double chamber?if not i would suggest you do.

peace
~chaos

I can't see a double weight cannon being particularly good personally, single shots and reloading twice on a lighter cannon is much better.

Incidentally, chaos, have you tried solid lead slugs?

You just need a bit of barrel, some tinfoil to line it with and some lead.

Use a soldering iron to melt some lead in a tinfoil pastry case (without holes in the base) and pour it in with a pair of pliers

A blowtorch would be better but it might crisp the tinfoil so a more solid thing would be needed.

I think I'll go and find some BB's now

Hotwired wrote:I can't see a double weight cannon being particularly good personally, single shots and reloading twice on a lighter cannon is much better.

Incidentally, chaos, have you tried solid lead slugs?

You just need a bit of barrel, some tinfoil to line it with and some lead.

Use a soldering iron to melt some lead in a tinfoil pastry case (without holes in the base) and pour it in with a pair of pliers

A blowtorch would be better but it might crisp the tinfoil so a more solid thing would be needed.

I think I'll go and find some BB's now

have i tried solid slugs ? well yer solid lead slugs actually and it kicks like a bitch'! (well they actually lead fishing sinkers without the holes got me own sinker mold )


so yer have fun Wired they quite entertaining

we uses tissue paper for these

here

and

Here


disclaimer: Nobody was seriously hurt/injured during the videos, the vids were merely the result of bored teenage adolescents

Very cool. Not only does it get the job done, but it gets it done in a nice looking package . Certainly worth me trying it.

is there some way you can do it with pvc instead of lead

oops sorry i meant platic bbs how do you fold the paper. im new . need instructions
:[]

dont forget there is an edit button on the top right corner of your messages you might get flamed if ya do it in a popular thread.

thanks for the comment btw hope it works for you as it did for me

chaos, where do you get those bb's from?

cheapie shop, i bought 4 packets for $4aus i reckon it was a bit of a rip but neways, i shall buy some #4 shotgun reloader pellets soon.

shotgun yay!

they had worked a treat in my 3/4" pneumatic - I make my shells similar to yours but using tissue wadding hammered into the base to seal it from behind.

[youtube][/youtube]

i just tried this it is so cool. it would be coolif you put a fire cracker in the center of the bbs

veginator wrote:it would be coolif you put a fire cracker in the center of the bbs

wot, like a shrapnel shell?

aye thats kool shrapnel shell,maybe ill get a test tube seal it with water in it and some rubidium glued on the front

i just shredded a 4 ring binder with 10 plastic bb's


[youtube][/youtube]