http://www.airbestpractices.com/industr ... ir-cannons
Found this on the web, please excuse if this has been discussed before. I am using a large air cylinder to refill my chamber. I could save lots of air and fill time if I could use this technology cheaply. Any ideas on how to build one?
Robert
Reduced air consumption cannons
-
wyz2285
- First Sergeant 2
- Posts: 2388
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
Basically what says there is a faster opening valve performs better 
(solenoid valve vs piston valve), just as a 1/2 QEV has better performance than a 3/4 sprinkler valve (same pressure same chamber volume same projectile same barrel). So less air and pressure is required for a same result.
(solenoid valve vs piston valve), just as a 1/2 QEV has better performance than a 3/4 sprinkler valve (same pressure same chamber volume same projectile same barrel). So less air and pressure is required for a same result.CpTn_lAw wrote:"yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "