Hey all, I was wonderin how the breech loader on boogie's coaxial worked??
Here's the link
http://www.advancedspuds.com/pneumatic.htm
How does the breech loader on advancedspuds work?
-
iPaintball
- Corporal 2
- Posts: 695
- Joined: Sun Mar 04, 2007 8:37 pm
It's just a cam lock fitting with a bushing on the end that holds a short piece of pipe to push the projectile past the tee.
Summer Projects:
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
Yea I get that..I mean its a coaxial right, and the end of the barrel has to be sealed.....so how does that work?
"Some say his pet elephant is pink, and that he has no understanding of "PG rated forum". All we know is, he's called JSR. "
-
spudthug
- Corporal 5
- Posts: 936
- Joined: Mon Feb 26, 2007 9:02 pm
- Location: johnsonburg, Pa USA
- Contact:
clide...u can not acheive a barrel to go through the chamber with the main valve being a sprinkler... that is jsut common sense...
4" piston valved cannon-half done..( i spilt my cement...)
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
-
clide
- Corporal 3
- Posts: 784
- Joined: Sun Mar 06, 2005 3:06 am
- Location: Oklahoma, USA
- Been thanked: 1 time
Did you look at the gun he linked to? It is even more straightforward than a piston valve, but I can draw a picture if you don't get it.spudthug wrote:clide...u can not acheive a barrel to go through the chamber with the main valve being a sprinkler... that is jsut common sense...