Page 1 of 1
Tyler's Air Soft Gun.
Posted: Mon Oct 29, 2007 12:35 am
by tylerthetatertosser
This is my Air soft co-axial cannon. I have had this for a while but never posted.
The over all length is about 16.5 inches, the barrel length is 12 inches, and the chamber is 1/2" type L 12 inches long. The piston is cast from epoxy with an inner tube crazy glued on for sealing face.
Posted: Mon Oct 29, 2007 12:37 am
by Marco321
Nice
Can i ask the OD of your barrel?
Posted: Mon Oct 29, 2007 12:38 am
by jackssmirkingrevenge
looks like good shock pump material, what pressures are you using?
Kudos for the cast epoxy piston, shame about the excess pilot volume
Posted: Mon Oct 29, 2007 12:40 am
by tylerthetatertosser
I think the barrel is 5/16 brake line, and i can get it up to 200 psi with my regular bike pump
Posted: Mon Oct 29, 2007 12:44 am
by SpudBlaster15
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Posted: Mon Oct 29, 2007 12:52 am
by Marco321
SpudBlaster15 wrote:I think you need to build a high pressure pump and take it to 300psi
I'm making one for my upcomming gun
Posted: Mon Oct 29, 2007 1:16 am
by jon_89
how is the barrel held in place? how far was your shot from?
Posted: Mon Oct 29, 2007 2:17 pm
by PVC Arsenal 17
Why the quick disconnect? All it's doing is making your gun less efficient.
In place of it you should put a bushing that will bring it down to 1/4" FPT. Connect it to the blowgun using a close nipple.
Otherwise, nice gun. It should be safe enough to take way beyond 100 psi. Post pics of the damage!
Posted: Mon Oct 29, 2007 8:10 pm
by tylerthetatertosser
how is the barrel held in place? how far was your shot from?
The barrel is held in palace with epoxy, and the shot was from about a foot away from the can.
Why the quick disconnect?
I use the quick connect because i have 3 copper pneumatics and one blow gun, i will get more blow guns for $ 3.99 ea when i go to a city 2 hours away.
Posted: Mon Oct 29, 2007 8:17 pm
by spudgunnerwryyyyy
Nice gun, and like jsr i know that you can reduce the pilot volume alot and that would lead to huge improvements in performance
Posted: Mon Oct 29, 2007 9:17 pm
by BigJon
Nice little co-axial you got there.
Have you shot it at farther distances, and if so how accurate is it?
Posted: Tue Oct 30, 2007 6:20 pm
by nivekatoz
The ture test of any gun has to be more than 1 foot away................I think at least 20 feet away.......Thats just my thought.....
Posted: Sat Feb 02, 2008 5:00 pm
by Sticky_Tape
What is the adapter on the front of the gun the one that conects to the tip of the barrel to hold it inside the chamber?
Nice gun by the way!
Posted: Sat Feb 02, 2008 5:05 pm
by schmanman
nivekatoz wrote:The ture test of any gun has to be more than 1 foot away................I think at least 20 feet away.......Thats just my thought.....
I'm thinking 50-100 feet.
Posted: Sat Feb 02, 2008 5:22 pm
by bigbob12345
very nice gun kinda like what Im currently working on exept mines pvc.