SpudFiles

Hi all,
Im building my fist pneumatic launcher and im trying to find a way to fill my gun up. If anybody could give me a list of possible fill valve and where to find them that would be great because i dont have an old bike and when i was at homedepot the lady starred at me very strangely when i asked for a shrader valve so any kind of help would be great.
thx

schraders are normall with the powertools/aircompressors, look where they have the airhoses and disconnects...

ok, wat would u suggest would be the best fill option? the one that could withstand the most PSI??

do a search for schrader+failure.... schrader will handle as much as you'll ever be able to acquire....

ok thank you so much for your help, hopefully i will able to post my gun up soon

hey i have a question

is there a method to connect hpa 500-1000 psi to shrader valve
something like this
http://images.google.co.il/imgres?imgur ... 0%26um%3D1

Shrader valves are more comonly known as tank fill valves. Look near the air compressors and such. that's where they will be.

look near the preasure tank or pump section the big blue tanks thats were mine are

ok thank you so much for all the help, i have also noticed people talking about quick connect or somehting, wat are those?

Amazazing wrote:ok thank you so much for all the help, i have also noticed people talking about quick connect or somehting, wat are those?

have you ever used air tools??? the method of attaching airtools to airhoses....

well not really, sorry if im really nooby on this subject

Here is a good example of a quick connect: http://www.homedepot.com/webapp/wcs/sto ... 401+527603

Far cry, good find with that fitting.

This is the only other type that I've seen which is rated for high pressures (1000psi +)

http://www.aircraftspruce.com/catalog/l ... seneck.php

Schrader USA Part# 6116

Rated to 3000psi.