Page 1 of 1
How Does A Modified Sprinkler Valve Work?
Posted: Thu Mar 01, 2007 6:59 pm
by BlackOps
How does a modified sprinkler valve work? Soon I'm going to make a pneumatic gun. What works better modified or un-modified. Also how does a modified one work. And also Is it physiscaly hard to pull the triger or what ever it is?
Posted: Thu Mar 01, 2007 8:29 pm
by noname
Do some research and find out for yourself. I'll bet you ten bucks you can search less than 15 minutes and answer all of your questions.
Posted: Thu Mar 01, 2007 8:41 pm
by zeigs spud
yea sooo not worth the time to post an acual answer
Posted: Thu Mar 01, 2007 8:42 pm
by c19o
look here :
http://www.spudfiles.com/spud_wiki/
the answers to most ( if all ) your questions will be there.
Posted: Thu Mar 01, 2007 9:32 pm
by dippydodo03
Remember what I told you.
Posted: Thu Mar 01, 2007 9:37 pm
by Flying_Salt
I'm feeling generous and will post a simple explanation. You have pressureized air on both sides of the diapragm. When you open the blowgun valve, the air on the top is released, and the valved opens upward, letting the air move into the barrel. I think gort has a neat little .gif of that.
No, it is not hard at all. Have you ever messed with blowguns at a hardware store? The air makes no difference on how hard it is to operate.
Next time, research!
Posted: Thu Mar 01, 2007 9:42 pm
by Scope
Guns are MUCH better motified
Posted: Fri Mar 02, 2007 12:31 pm
by BlackOps
Flying_Salt wrote:I'm feeling generous and will post a simple explanation. You have pressureized air on both sides of the diapragm. When you open the blowgun valve, the air on the top is released, and the valved opens upward, letting the air move into the barrel. I think gort has a neat little .gif of that.
No, it is not hard at all. Have you ever messed with blowguns at a hardware store? The air makes no difference on how hard it is to operate.
Next time, research!
Thank's for that I looked around for about 20 minutes and found nothing.
Posted: Sat Mar 03, 2007 3:01 pm
by BlackOps
dippydodo03 wrote:Remember what I told you.
???
Posted: Sat Mar 03, 2007 3:31 pm
by spudthug
why would you even ask if modded or un modded works...why would people mod them if they worked worse???and never post these questions the wiki has almost everything you will ever need for any spud related idea
Posted: Sat Mar 03, 2007 5:40 pm
by BlackOps
I was looking at the wiki but, some of the pages wern't working.
Posted: Sat Mar 03, 2007 5:51 pm
by LGM
It took me less than 10 seconds to find the page relating to modifying valves on the wiki, go to the pneumatic section and click on modifying valves.