serious pistol
I wanted to make a pistol that isn't very big and to be still powerfull.This little baby here is loud and as most of my guns it gives great barrel flash.To be more powerfull and acurate I puted the barrel in the chamber.As a combustion it's nothing much but it become a tradicion for me to tuning my guns with oxigen.So now it is realy cool.
- rna_duelers
- Staff Sergeant 3
- Posts: 1739
- Joined: Mon Sep 26, 2005 7:07 am
- Location: G-land Australia
I love the minis you make,and supeing them up with oxygen into them.just wondering how u add the oxygen with out adding to much,and wat is your farthest shot?
It is a poor coaxial combustion.And what's wrong if I put too much O2?I have safety glases so even if it blow(wich just can't happend because the pipe is much more strong then the coke bottles wich can indure....-remember the coke bottle hybrid?) I won't get seriously hurt.With out O2 mini spudguns will always be week=>miserable.
- rna_duelers
- Staff Sergeant 3
- Posts: 1739
- Joined: Mon Sep 26, 2005 7:07 am
- Location: G-land Australia
My bad,wasnt thinking...(that happens alot).and so true on the coke bottle hybrid, i was going to make one of them out of things i had lying around but the idea of a failing coke bottle didnt seem to nice to me.I reacon you should be named king of mini's...or is that just me? 

As I shooted with my pistol I was realy anoyed that it don't have the fire power I expected.I was just not loud.I started to put more O2 and oh well the hole syringe
...It wasn't enough for me.Then I took a new two times bigger syringe all with H2O2.I used all of it and put a different fuel(lots of it) for extra vapers.I took a PC mania magazine between the pistol and the monitor of the computer.I had a sfety glases...so I wasn't hurt when it blew up, only the end cap hit me but it didn't hurt after a minute. 


That barrel looks just like the 29mm (inner diameter) one I use in the AMC. Well... at least now I know it can't hold much pressure 
Too bad for your gun, though. Perhaps you could cut the remaining barrel straight sleeve a smaller pipe inside or add it via reducer.

Too bad for your gun, though. Perhaps you could cut the remaining barrel straight sleeve a smaller pipe inside or add it via reducer.
- rna_duelers
- Staff Sergeant 3
- Posts: 1739
- Joined: Mon Sep 26, 2005 7:07 am
- Location: G-land Australia
stronger then the coke bottle hey..lol:P