Hi all
I am new to this site/forums and would like to say some of the work I'v seen is just amazing.
But I would like to get some advice from the pro's as me and me mates have been having some trouble with the fuel/air mix in our cannon.
we are using part WD40 and part deoderant with a car coil igniton.
I think we might need to get more Air into the chamber I have seen the use of computer fans but being new to this (newbie,noob whatever) I'm not sure if they are used for Exhausting the spent air and fuel or to get the air into the chamber.
We were thinking of using the air compressor to get a quick shot of air into it.
but when it finaly does work she gets them potatos flying
oh well any ideas or suggestions you may have would be geatly Appreciated
Thanks
VEGEMITEMODDER (AUSTRALIA)
First Attempt
- LucyInTheSky
- Specialist 2
- Posts: 293
- Joined: Fri Apr 21, 2006 11:46 am
Dont use WD40 its usless unless you have a very old can.
Fans are for exhausting spent fumes and mixing air and fule in the chamber.
Fans are for exhausting spent fumes and mixing air and fule in the chamber.
As LITS said, WD40 changed there formula so it no longer works for our use. For my aersol guns I use starting fluid.
'Chamber Fans' are used to both exhaust spent contents, and to 'mix' fuel prior to ignition. For the time being just let the cannon 'air out' a bit more, or as you were thinking, blow it out with a air nozzle on a air compressor. Another thing that helps is to load your cannon with the cap off. It both makes it a lot easier to 'push' in, and it assists in the 'venting' of the spent gasses. Hope that helps, and feel free to bounce more questions.
'Chamber Fans' are used to both exhaust spent contents, and to 'mix' fuel prior to ignition. For the time being just let the cannon 'air out' a bit more, or as you were thinking, blow it out with a air nozzle on a air compressor. Another thing that helps is to load your cannon with the cap off. It both makes it a lot easier to 'push' in, and it assists in the 'venting' of the spent gasses. Hope that helps, and feel free to bounce more questions.
- VEGEMITEMODDER
- Private 4
- Posts: 69
- Joined: Sun Aug 06, 2006 8:21 am
- Location: Australia Mate
thanks guys
actualy it might be a bit different to WD40.
We were using some of the same sort of stuff but I'm not sure that you have it in the USA but I do have some of that starter stuff (START YA BASTARD) I dunno I might get banned for that but that is what is called and is 25% eather
before we use it tomrow I might put some computer fans in it and see how it goes.
thanks again
actualy it might be a bit different to WD40.
We were using some of the same sort of stuff but I'm not sure that you have it in the USA but I do have some of that starter stuff (START YA BASTARD) I dunno I might get banned for that but that is what is called and is 25% eather
before we use it tomrow I might put some computer fans in it and see how it goes.
thanks again
- VEGEMITEMODDER
- Private 4
- Posts: 69
- Joined: Sun Aug 06, 2006 8:21 am
- Location: Australia Mate
Well today we tested out the cannon and had great Success using a few different fuels.
part AROSTART
part deoderent
and part RP7
I think the RP7 gave it that kick it needed to launch that potato (over 300 meters )
some of the shots we did had that much recoil it blew part of the stand apart .
we have plans to make a automatic turret using a few windscreen wiper motors in the shed and a remote trigger
thanks for your help
part AROSTART
part deoderent
and part RP7
I think the RP7 gave it that kick it needed to launch that potato (over 300 meters )
some of the shots we did had that much recoil it blew part of the stand apart .
we have plans to make a automatic turret using a few windscreen wiper motors in the shed and a remote trigger
thanks for your help
- VEGEMITEMODDER
- Private 4
- Posts: 69
- Joined: Sun Aug 06, 2006 8:21 am
- Location: Australia Mate
Now has remote SMS ignition hehe