SpudFiles

I'm trying to get a new ignitor, because my current one...broke. I'm going to use the camera flash method. I have a good idea of what to do, but just in case, could someone show me some pictures or a diagram of how much I could/should take off?

Remove everything except the circuit board and whatever is directly attached to it.
Are you going to use an ignition coil with the flash, or just the flash itself?

Will I need an ignition coil to make a spark?

EDIT: I touched the circut board with my pliers and the flash went off

I remember when i took my camer apart and took the battery out thinking if theres no battery theres not power, i picked it up and the caacitor discharged into my fingers.

Yes you probably will need a ignition coil to get a reasonable spark.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.

Where/how could I find/make an ignition coil?
Also, will I need the AA battery, or does my capacitator supply all the power?


EDIT: 100th post!

LucyInTheSky wrote:I remember when i took my camer apart and took the battery out thinking if theres no battery theres not power, i picked it up and the caacitor discharged into my fingers.

Yeah same thing happened to me. After the first time I thought all the power was discharged, so when I dropped it I put my hand on it, on the metal prong coming from the capacitaor actually, and boy, that that sting.

Lol that happens every time I worked on my old tv. It had lots of loose
caps and resistors. It was lik 14 years old when I blew up the coil in the
picture tube by accident. My dad thought it was the funniest thing in the
world seeing me jump each time I got zapped.

Everyone who messes with capacitors has been stung by them.

I think the only time it happened to me was when I was about 8 and dismantling a flash camera and unsuspectingly trying to remove the circuit board

Since then its been wires (or more usually any screwdriver I've got handy) across the terminals to make dam sure its not holding charge and even then I avoid touching both wires just for good practice

Nothing like having something logically nasty happen to make you understand why you shouldn't do something....

Hotwired wrote:Everyone who messes with capacitors has been stung by them.

I think the only time it happened to me was when I was about 8 and dismantling a flash camera and unsuspectingly trying to remove the circuit board

Since then its been wires (or more usually any screwdriver I've got handy) across the terminals to make dam sure its not holding charge and even then I avoid touching both wires just for good practice

Nothing like having something logically nasty happen to make you understand why you shouldn't do something....

lol true that. We shouldn't be playing with electricity, but it's fun and no one's here to stop us.

So, can the capacitator be fully discharged before I work with it, or should I just not touch the circuts? I wonder is wearing gloves would help insulate.

Erm.... its generally not nice to get a shock off the capacitor.

Get a screwdriver or something and touch both wires coming out of the capacitor. If nothing happens fine, its already discharged otherwise you'll get a fat spark flash from where the screwdriver is contacting the wires.

Either way its then safe to touch.

Just don't make a habit of touching capacitor wires with your fingers to see if they're charged

You need to keep the battery, the cap only stores a charge from the battery.
Cut one of the leads going to the ends of the flash tube, and connect input and ground of the ignition coil in between. Connect the spark gap between output and ground of the ignition coil.
Keep the original charging button or connect a switch to the terminals. Connect the trigger switch to the contacts going to the shutter (usually two thin metal blades that sit close together).
When the trigger switch is pushed the flash will fire, dumping the charge acros the ignition coil, which will produce a high voltage spark for ignition.

Yeah I think it's already discharged. I've shocked myself twice, and I tried to pick it up with my pliers, and the flash went off it my face.