SpudFiles

I decided to build one "perfect" combustion gun, and throw away all my old and jury-rigged ones (Hey, it's a learning process). I'd like some opinions from the experts here on a few things.

I'm going to base this gun on
This design, which is over/under, propane metered/injected, stungun/sparkstrip ignition, ball valve venting, cam-lock pass-through barrel, fan, etc... Gort has pointed out that the main problem with this design is the lack of a way to access the chamber. I play to attach the back 4"-2" reducer (that connects the venting valve to the barrel) with 8 or so screws, instead of glue, to allow access to the chamber if repairs are needed. Any objections?

I'm going to use ABS. I've pressure tested it and feel safe with it. It won't shrapnel if it fails (as PVC will) and is much cheaper than NSF-PW PVC parts. Plus I already have a lot of ABS stock laying around.

I'm going to mount it on a stand with wheels anyway, so I'm going for a 10', 1.5" (or 1.5" SDR21) barrel. So, obviously, I have to pick my C:B ratio. I want to use 4" for the chamber. I have 5' of 4" ABS, plenty to play with.

10' of 1.5" ABS sch40 is approx. 206 cubic inches of volume.

I was thinking about a 1.5:1 ratio, which would be roughly 25" of 4" pipe. Any suggestions on this? Is 1.5:1 a good number for a large combustion gun?

Where in the chamber would be the best place for the spark strip, and the fan? Is it worth it to try to suspend the spark strip in the center of the chamber, or just mount it to the side of the chamber, near the back/middle?

The last thing I'm unsure on is what kind of stand to build. I'm kind of clueless here. I was thinking of using the bases from two office chairs and some 2x4"s to build an adjustable stand, or maybe two big wheels in the back and an adjustable height bipod in the front. Suggestions?

Thanks a ton for the input, guys. I'll post pics of the build process and finished product.

Peace,
Pete Zaria.

Sounds alright, Should be BLOODY POWERFULL with a 10' barrel.

I believe the 'best' ratio for a metred propane injection combustion is a .8:1 C:B.The 1.5:1 is said to work better for the more conventional spray arosol(sp) type cannons.

rna_duelers wrote:I believe the 'best' ratio for a metred propane injection combustion is a .8:1 C:B.The 1.5:1 is said to work better for the more conventional spray arosol(sp) type cannons.

***With a fixed chamber size

Exactalmente.

Just use the whole 10' stick of 1-1/2", and adjust chamber size accordingly. When I do this, I usually just set it at a simple 1:1 ratio.

Markfh, that's exactly what I said I'm doing; a 10ft 1.5" barrel, and 4" x ?? combustion chamber. I'm trying to decide how big a chamber to use. Since it's an over/under, size isn't really a problem. I could do as big as 500ci, but it seems just unnecessary and ridiculous. I think I'm gonna go for 1.5:1 . My primary ammo will be golf balls. What do you think?

Peace,
Pete Zaria.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.

if u have a ten foot barrel how do u move the gun...

is the pipe presure rated, cause it wouldn't be fun blowing yourself up with all that power