i found this video on youtube earlier and i thought it was interesting so i just posted it.
i believe its a hybrid pellet gun its wicked
http://youtube.com/watch?v=mGRKYcsTImo
hybrid pellet gun(not my creation)
- thespeedycicada
- Specialist 4
- Posts: 429
- Joined: Sun Aug 12, 2007 1:28 am
this has been posted before i dont think its that safe,cool but not really safe.
current projects: co-axial piston valve.Status DONE!
S.P.E.C.S update mk 1 construction begining in febuary all the maths for it are done plans are drawn up and parts are listed.
NEXT project:auto piston valve.
S.P.E.C.S update mk 1 construction begining in febuary all the maths for it are done plans are drawn up and parts are listed.
NEXT project:auto piston valve.
- D_Hall
- Staff Sergeant 5
- Posts: 1922
- Joined: Thu Feb 07, 2008 7:37 pm
- Location: SoCal
- Has thanked: 7 times
- Been thanked: 44 times
I'd be curious to see what his gun did BEFORE he drilled the hole in it. The point being that the hole he drilled WILL affect performance. It's entirely possible that the gun had better performance BEFORE modifiation than it does after (even with the C2H2 injection).
-
- Specialist
- Posts: 129
- Joined: Wed Sep 19, 2007 12:19 pm
- Location: maryland
oh i wasnt sure if it was posted
I might actually make something like this at some point if I can get a hold of some acetylene. With a thick aluminum piston tube, a resealable injection hole, a compressed gas spring, and a chamber long enough to cause a detonation on firing, it could launch light projectiles *very* quickly.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.