The highest possible mix for a hybrid?

Harness the power of precision mixtures of pressurized flammable vapor. Safety first! These are advanced potato guns - not for the beginner.

The highest possible mix for a hybrid?

15x
1
8%
25x
0
No votes
50x
0
No votes
75x
0
No votes
100x
0
No votes
100+
11
92%
 
Total votes: 12
User avatar
Larda
Specialist
Specialist
Posts: 119
Joined: Wed Jul 18, 2007 7:52 am
Location: Sweden

Donating Members

Thu Jul 24, 2008 4:51 pm

How high mix hybrids do you think its possible to build?
Can you go above, lets say, 15x, 25x, 50x 75x, 100x or even higher?
To clarify i am talking about Air-Propane, not Oxy-Propane.
Push to test... Release to detonate.
User avatar
jimmy101
Sergeant Major 2
Sergeant Major 2
United States of America
Posts: 3206
Joined: Wed Mar 28, 2007 9:48 am
Location: Greenwood, Indiana
Has thanked: 6 times
Been thanked: 18 times
Contact:

Thu Jul 24, 2008 5:24 pm

This has been asked and answered before.

The limitation is the liquifaction pressure of the mixture. Propane liquifies at a fairly low pressure. What's the pressure in a propane tank at 70F? 150 PSI or something like that?

So you can't get anywhere near 100X.
Image
User avatar
BC Pneumatics
Sergeant
Sergeant
Posts: 1053
Joined: Tue Jan 18, 2005 6:55 pm
Location: Fresno, CA
Contact:

Donating Members

Thu Jul 24, 2008 5:32 pm

The highest mix you can achieve depends on the temperature.
At 70*F the vapor pressure of propane is 110psi. This means with a partial pressure of roughly 4%, you are limited to 2800psi, or around 190x, before any extra propane turns to liquid.
Of course building a cannon that can hold 2800psi is a bit of a challenge in and of itself. Trying to ignite a mixture that is at that pressure is something else entirely. It is 'possible' to build a launcher to contain this, so there's your answer, but I wouldn't hold me breath on seeing one.
Last edited by BC Pneumatics on Thu Jul 24, 2008 7:41 pm, edited 1 time in total.
User avatar
SpudFarm
First Sergeant 3
First Sergeant 3
Posts: 2571
Joined: Sat Nov 04, 2006 9:39 am
Location: Norway Trondheim area

Donating Members

Thu Jul 24, 2008 7:22 pm

i can correct jimmy:D

on 100x you want 4.3bar of propane and that is totally doable.
the limit will be 200x then the pressure is 8.6 bar and that is also doable since.....
Attachments
a little over 20 celcius and a 200x is in your hand
a little over 20 celcius and a 200x is in your hand
"Made in France"
- A spud gun insurance.
User avatar
BC Pneumatics
Sergeant
Sergeant
Posts: 1053
Joined: Tue Jan 18, 2005 6:55 pm
Location: Fresno, CA
Contact:

Donating Members

Thu Jul 24, 2008 7:41 pm

SpudFarm,
Almost feels good in a schadenfreude sort of way, eh? :wink: :lol:

Of course one can see from both SpudFarm's post and mine as well that the ambient temperature is the big factor here. While a person in one part of the world may be limited to 120x, another could achieve twice that just because it's a warm day.

But, it doesn't matter if no one is willing to take up the geometric increase in cost that is associated with an arithmetic increase in performance.
User avatar
SpudFarm
First Sergeant 3
First Sergeant 3
Posts: 2571
Joined: Sat Nov 04, 2006 9:39 am
Location: Norway Trondheim area

Donating Members

Thu Jul 24, 2008 8:00 pm

who knows?someone may feel like setting a record someday BC, if i har a lathe and a huge tungsten carabide steel bar and the cutters needed i would have found the limit :D

and yes it is pretty good to correct the smartesy guy on the smartest website ever! he will do comeback and say [jamie hyneman voice] oh i meant 200x "typo" [/jamie hyneman voice]
"Made in France"
- A spud gun insurance.
User avatar
jimmy101
Sergeant Major 2
Sergeant Major 2
United States of America
Posts: 3206
Joined: Wed Mar 28, 2007 9:48 am
Location: Greenwood, Indiana
Has thanked: 6 times
Been thanked: 18 times
Contact:

Thu Jul 24, 2008 9:13 pm

I stand corrected. BC and SPudFarm are correct.

I forget a "minor" factor of ~25x. :oops:
Image
User avatar
SpudMonster
Specialist 2
Specialist 2
Posts: 250
Joined: Mon Aug 08, 2005 5:54 pm

Fri Jul 25, 2008 3:51 am

And for more fun, we simply go to Natural Gas instead of propane. I have no idea what the vapor pressure is, but CNG is stored at about 2900-3200 PSI, so with a stoichometric ratio of about 5%, we could have 4,353x hybrids (hypothetically). And if we assume that Natural Gas behaves similarly to propane (minus 20 percent because of its lower energy content) when combusted, given that an atmospheric propane mixture produces a maximum of 100 PSI (and 4x mixtures produce approximately 400 PSI with proper discs) then a post-combustion maximum pressure of almost 350,000 PSI would be possible.
I probably am wrong, but it's still fun to fantasize about.
Last edited by SpudMonster on Fri Jul 25, 2008 4:00 am, edited 1 time in total.
Stupid quote of the now:
joestue "The chamber is rated to 100 psi, it don't say that on the side, but the 2 inch stuff is rated to 300, so by analogy..."
"only the last two feet hear the end is black cellular core"
"I'm taking it to 300 psi"
User avatar
ALIHISGREAT
Staff Sergeant 3
Staff Sergeant 3
Posts: 1778
Joined: Sat Aug 25, 2007 6:47 pm
Location: UK

Fri Jul 25, 2008 3:56 am

just out of a matter of interest, what kind of pressures are produced in BIG gun barrels, like tank gun barrels, maybe the military should forget solid fuel in favour of a high pressure mix of gases?
User avatar
DYI
First Sergeant 5
First Sergeant 5
Antigua & Barbuda
Posts: 2862
Joined: Sat Jul 07, 2007 8:18 pm
Location: Here and there

Fri Jul 25, 2008 8:19 am

I believe that some tank guns can reach as high as 90 kpsi barrel pressure. Nitrocellulose has a maximum combustion pressure of well over 300 kpsi. The really high pressure mixes are to be had with oxy/hydrogen though. If I remember correctly, neither of those gases can liquefy at room temperature (they will obviously become a supercritical fluid though, and it would be interesting to see how those behave in a hybrid), so the highest attainable mix is really whatever your hardware can withstand.
maybe the military should forget solid fuel in favour of a high pressure mix of gases?
A good rule of thumb: If you come up with a good idea, chances are that it's already been thought of by someone else, and probably already built. In this case, Utron's CLGG takes the honors, using a light gas mix (either CH<sub>4</sub> or H<sub>2</sub> burned in what is presumably pure oxygen, they don't really specify), to fire projectiles out of a 155mm bore at speeds in excess of 4km/s. I read something about it being able to hit a 5 metre square target at 100 miles as well.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
User avatar
paaiyan
First Sergeant
First Sergeant
Posts: 2140
Joined: Wed Dec 27, 2006 10:03 pm
Location: Central Oklahoma
Been thanked: 1 time

Fri Jul 25, 2008 8:30 am

SpudMonster wrote:And for more fun, we simply go to Natural Gas instead of propane. I have no idea what the vapor pressure is, but CNG is stored at about 2900-3200 PSI, so with a stoichometric ratio of about 5%, we could have 4,353x hybrids (hypothetically). And if we assume that Natural Gas behaves similarly to propane (minus 20 percent because of its lower energy content) when combusted, given that an atmospheric propane mixture produces a maximum of 100 PSI (and 4x mixtures produce approximately 400 PSI with proper discs) then a post-combustion maximum pressure of almost 350,000 PSI would be possible.
I probably am wrong, but it's still fun to fantasize about.
What exactly would one use for a burst disc on a cannon like that, 1/4" steel plate?
"Who ever said the pen was mightier than the sword, obviously, never encountered automatic weapons."
-General Douglass MacArthur

Read my dog's blog - Life of Kilo
User avatar
DYI
First Sergeant 5
First Sergeant 5
Antigua & Barbuda
Posts: 2862
Joined: Sat Jul 07, 2007 8:18 pm
Location: Here and there

Fri Jul 25, 2008 8:47 am

What exactly would one use for a burst disc on a cannon like that, 1/4" steel plate?
Depends on the bore. D_Hall is using 1/4" plate for burst disks in his Pipe Dream, and they'll be bursting at well under 100 psi, if I remember correctly.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
User avatar
SpudFarm
First Sergeant 3
First Sergeant 3
Posts: 2571
Joined: Sat Nov 04, 2006 9:39 am
Location: Norway Trondheim area

Donating Members

Fri Jul 25, 2008 9:10 am

but if you want to go onto a like 1000x isnt it just to messure and calculate the amount of liquid propane needed for that shot and then have a flow messure instrument like they use on the fuel line on cars to find out how much fuel it use, so you can messure it out? it will make sence to me that it turns to gas when it gets 999bars of air on it and it is just 4.2% of gas in there again :?

heck that was har to explain to me
"Made in France"
- A spud gun insurance.
Post Reply