Thank you for Your Replys you Really Helped Me But Now all i Have is One More Questions and that is: how Much Air/Propane Should i use (S.P. id Prefer you Tell me in P.S.I.)
Pleas And Thank You.
Air/Fuel Percentages for Propane
-
mark.f
- Sergeant Major 4
- Posts: 3638
- Joined: Sat May 06, 2006 11:18 am
- Location: The Big Steezy
- Has thanked: 58 times
- Been thanked: 61 times
- Contact:
Weeeelll...
I can't tell you in PSI. I would need the meter volume, chamber volume, and mix number.
Second of all, the air/fuel ratio (volumetric) for propane is 4.2%.
I can't tell you in PSI. I would need the meter volume, chamber volume, and mix number.
Second of all, the air/fuel ratio (volumetric) for propane is 4.2%.
-
MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
And I keep telling you to search! You obviously have no clue what you are doing if you think we can just give you a fixed PSI (unless it was manometric metering, but you still should be able to figure that out yourself). Anyway, all the information you need is on the forum, check the forum sections which I told you to in your last topic.
If you don't listen to us, we wont listen to you. Make another stupid topic and it will be deleted. Have fun with the research, ask us questions when you have a clue what you're building.
If you don't listen to us, we wont listen to you. Make another stupid topic and it will be deleted. Have fun with the research, ask us questions when you have a clue what you're building.