Ok, thanks. I wasn't sure what that would do so I asked. Which brings me to another idea... Could you measure the liquid propane with a meter similar to the meters in a gas pump? I believe that it uese a special kind of check valve with a spindle on it that records how fast the gas is moving so it can determine how much is going in and how much to charge?SpudFarm wrote:it wont work since it will turn into liquid in the compressor..
a high pressure waterpump can pump liguid propane in there but it will be hard to messure
Lardas First Hybrid - HyGaC20
-
brogdenlaxmiddie
- Corporal
- Posts: 562
- Joined: Sun Jul 22, 2007 2:19 pm
-
brogdenlaxmiddie
- Corporal
- Posts: 562
- Joined: Sun Jul 22, 2007 2:19 pm
funny how great minds think alikeSpudFarm wrote:haha the funny thing is that i said JUST THAT to galfisk not long ago
Thanks for the feedback everyone, i will upload some more damage pict's and add more info later.
Some answers:
"-What did this project cost you?"
Iam not sure, but only the digital gauge was over 250$ , the scuba tank and other parts was also several hundred dollars.
"-How much does this gun weigh?"
I will try to check that tomorrow.
"-Could you try to give an indication how loud the bang is?"
Louder then a normal hunting rifle.
About 30 second after i made a 100x shoot i got a cal from a friend that lives over a km from where i was shooting, he heard the loud bang when he was standing in the shower.
"-Could we get a pic of your burst disks?"
Here is a picture of one used and on unused burst disk made of 0.5mm brass, so far i am using 3 disks but i think i could use more of them.
The disk is 32mm YD and they are tightened down against a O-ring.
"-What did you use as barrel?"
I am using a 1.8m long precision drawn seamless pipe with 20mm ID.
Ramses:
I will try to get some readings with higher mass later.
Some answers:
"-What did this project cost you?"
Iam not sure, but only the digital gauge was over 250$ , the scuba tank and other parts was also several hundred dollars.
"-How much does this gun weigh?"
I will try to check that tomorrow.
"-Could you try to give an indication how loud the bang is?"
Louder then a normal hunting rifle.
About 30 second after i made a 100x shoot i got a cal from a friend that lives over a km from where i was shooting, he heard the loud bang when he was standing in the shower.
"-Could we get a pic of your burst disks?"
Here is a picture of one used and on unused burst disk made of 0.5mm brass, so far i am using 3 disks but i think i could use more of them.
The disk is 32mm YD and they are tightened down against a O-ring.
"-What did you use as barrel?"
I am using a 1.8m long precision drawn seamless pipe with 20mm ID.
Ramses:
I will try to get some readings with higher mass later.
Push to test... Release to detonate.
Yeah that's pretty loud if he's being truthful...inside the house...in the shower...1 km away. I can tell by the video it's got a beefy "mature" sound.Larda wrote: About 30 second after i made a 100x shoot i got a cal from a friend that lives over a km from where i was shooting, he heard the loud bang when he was standing in the shower.
Thanks for the burst disk pics. Do you have an estimate the pressure they are bursting at? Obviously they have to at least contain 200x. You could stand to go, and would want to go substantially past that.
I imagine getting a good measurement of that may be very difficult.
-
SpudMonster
- Specialist 2
- Posts: 250
- Joined: Mon Aug 08, 2005 5:54 pm
It's worse than that. I was thinking about using metered liquid propane about a week ago for large cannons or high hybrid mixes as well.brogdenlaxmiddie wrote:funny how great minds think alikeSpudFarm wrote:haha the funny thing is that i said JUST THAT to galfisk not long ago
Stupid quote of the now:
joestue "The chamber is rated to 100 psi, it don't say that on the side, but the 2 inch stuff is rated to 300, so by analogy..."
"only the last two feet hear the end is black cellular core"
"I'm taking it to 300 psi"
joestue "The chamber is rated to 100 psi, it don't say that on the side, but the 2 inch stuff is rated to 300, so by analogy..."
"only the last two feet hear the end is black cellular core"
"I'm taking it to 300 psi"
What do you use to ignite these high mixes with?
And now...I compliment you on such a project. This, folks, is dedication to this hobby at its finest.
And now...I compliment you on such a project. This, folks, is dedication to this hobby at its finest.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
One would think the burst disk fragments alone would be enough to tear a target to shreds 
Once again, amazing stuff
Once again, amazing stuff
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
CasinoVanart
- Specialist 2
- Posts: 281
- Joined: Wed Jul 30, 2008 1:10 am
Sir Hubb, if you look at the pics on the first page your answer will be clear. (he uses a thin wire)
Geez, i don't know, damn noobies!
Geez, i don't know, damn noobies!
Thanks for pointing that out. I saw the fourth time I looked at it.
-
Crna Legija
- First Sergeant 2
- Posts: 2333
- Joined: Sun Jul 20, 2008 5:14 am
- Location: australia
this is my only face -_- .
BUT AFTER THAT IT WAS MORE LIKE
BUT AFTER THAT IT WAS MORE LIKE
-
SpudFarm
- First Sergeant 3
- Posts: 2571
- Joined: Sat Nov 04, 2006 9:39 am
- Location: Norway Trondheim area
that would say it as good as louder than a .50... when i was shooting i was 1.2km away from my parents that was home (my dad was with me) and they barely heard a sound other than the smack when it hit the rocks since that was 750yards closer to them.starman wrote:Yeah that's pretty loud if he's being truthful...inside the house...in the shower...1 km away. I can tell by the video it's got a beefy "mature" sound.Larda wrote: About 30 second after i made a 100x shoot i got a cal from a friend that lives over a km from where i was shooting, he heard the loud bang when he was standing in the shower.
Thanks for the burst disk pics. Do you have an estimate the pressure they are bursting at? Obviously they have to at least contain 200x. You could stand to go, and would want to go substantially past that.
I imagine getting a good measurement of that may be very difficult.
"Made in France"
- A spud gun insurance.
- A spud gun insurance.
-
Acdcmonkey1991
- Specialist 3
- Posts: 386
- Joined: Fri Mar 30, 2007 3:33 pm
- Location: Florida
holy crap I just saw this amazing piece of work, nice job on the machining, love the 10mm steel damage picture, my new favorite gun on the site!
VH was awesome!!
Current projects:
C02 Jetpack (CIIJ)
Waterjet vehicle
.177 cal. piston rifle
Current projects:
C02 Jetpack (CIIJ)
Waterjet vehicle
.177 cal. piston rifle
They are. Larda showed me a slow motion video of a shot where the teflon sabot fragmented in the barrel, and the sabot bits and brass from the disk shredded the wooden target like grenade shrapnel.One would think the burst disk fragments alone would be enough to tear a target to shreds
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.