Here is a video <a href="http://s161.photobucket.com/albums/t201 ... _08122.jpg" target="_blank"><img src="http://i161.photobucket.com/albums/t201 ... _08122.jpg" border="0" alt="Photobucket"></a>UN6M now with video
-
super spuder
- Corporal
- Posts: 558
- Joined: Fri Apr 06, 2007 9:05 pm
- Location: Ontario Canada
this is my new BB gun, just finished it today. haven't posted any cannons that i have made for a while cause all the ones i did ended up in ABS VS PVC debates. Pleas DO NOT start arguing about PVC and ABS. This gun is ABS, its not going to change. now that that is over. i used a pice of 16 inch 3/8 brake line as the barrel. the cloud chamber is 1.5 inches by 4... and it is all sleaved inside a pice of 3 inch pipe. Im going to paint it when it gets warmer, cant use spray paint when its this cold and my mom wont let me bring that can in the house Here is a video <a href="http://s161.photobucket.com/albums/t201 ... _08122.jpg" target="_blank"><img src="http://i161.photobucket.com/albums/t201 ... _08122.jpg" border="0" alt="Photobucket"></a>
Here is a video <a href="http://s161.photobucket.com/albums/t201 ... _08122.jpg" target="_blank"><img src="http://i161.photobucket.com/albums/t201 ... _08122.jpg" border="0" alt="Photobucket"></a>
Last edited by super spuder on Mon Mar 31, 2008 9:42 pm, edited 2 times in total.
trying to decide on a new project, probably something small.
it looks like a battering ram with a blow gun on it... or wait, is it a battering ram with a blow gun? GENIUS!!!!
im just kidding. i think it looks good, but a stock sure wouldnt hurt it.
im just kidding. i think it looks good, but a stock sure wouldnt hurt it.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
-
bigbob12345
- Staff Sergeant
- Posts: 1516
- Joined: Sat Dec 01, 2007 9:13 am
- Location: Mercer Island,Washington
nice and simple
bet it gets decent power
ahh abs you are going to die
bet it gets decent power
ahh abs you are going to die
I have a story to tell. I applied about 15 coats of plastidrip to a gun IN MY BASEMENT in winter, and the air in the house is just cycled! my dad came home FLIPPED out opened the windows when it was 30% out and we all went out to a movie:P. I probably lost some brain cells that day and learned my lesson.super spuder wrote: cant use spray paint when its this cold and my mom wont let me bring that can in the house
-
super spuder
- Corporal
- Posts: 558
- Joined: Fri Apr 06, 2007 9:05 pm
- Location: Ontario Canada
yea, i was going to put a stock on it, havent figured out how to with out blocking the cap to put in the BBs though. i shot about 10 bb.s out of it, goes though a pop can fine, might try a card board box tomorrow with lots of BB's.
edit: LMAO pizlo. meh, who needs brain cells anyways
edit: LMAO pizlo. meh, who needs brain cells anyways
trying to decide on a new project, probably something small.
-
Davidvaini
- Sergeant 4
- Posts: 1315
- Joined: Tue May 29, 2007 8:58 pm
i think its pretty obvious but why dont you have a stock attached to the cap... you unscrew the cap and the stock as one piece...
-
super spuder
- Corporal
- Posts: 558
- Joined: Fri Apr 06, 2007 9:05 pm
- Location: Ontario Canada
there is now a video on the first post. Could do that, buti am out of 1.5 inch pipe, and i made it to shoot not look good .
.trying to decide on a new project, probably something small.
-
OuchProgramme
- Specialist 3
- Posts: 371
- Joined: Sat Jan 12, 2008 7:30 pm
Looks like a cut off hurdle 
One of those unexpected convert guns lol.
One of those unexpected convert guns lol.
-
bigbob12345
- Staff Sergeant
- Posts: 1516
- Joined: Sat Dec 01, 2007 9:13 am
- Location: Mercer Island,Washington
nice vid, seems to be nice and powerful
nice job
nice job