gernade luncher
this is my gernade luncher. what you do is fill the small tubs to the top,the capacity on min is 67 bbs in all. you connect it to a valve using a 1" brass coffling from there to a air source it can shoot at 456fps,i have a speed gun i clocked it and did the math from there post for informaton
- Attachments
-
-
-
-
- ok this is the whole system but the head could be ataches to aney 1" fitting
Last edited by spudling on Mon Mar 19, 2007 11:16 pm, edited 1 time in total.
-
Modderxtrordanare
- Corporal 2
- Posts: 686
- Joined: Mon Nov 20, 2006 1:22 pm
- Location: Texas
How is this a "gernade luncher?"
-
Modderxtrordanare
- Corporal 2
- Posts: 686
- Joined: Mon Nov 20, 2006 1:22 pm
- Location: Texas
Correct me if I'm wrong, but you fill up the four tubes with BBs, and hook the other end up to an air source. Then when you let air through it fires all the BBs out?
-
p0ond nAti0n
- Private
- Posts: 12
- Joined: Fri Feb 09, 2007 3:09 pm
hmm wat i would do is is get a pressure rated tank with a industrial strength butterfly valve and a nice new shiny barrel, for ammunition use 2 pieces of foam with those bb's squish the 2 pieces 2 gether and push down the barrel a bit. thats wat i would call a bb cannon ? i fully don't understand the grenade thing
-
BC Pneumatics
- Sergeant
- Posts: 1053
- Joined: Tue Jan 18, 2005 6:55 pm
- Location: Fresno, CA
- Contact:
Nifty little device! Is there much danger of the barrels getting damaged being exposed like that? (Are you planning on covering them with a sleeve?)
Has it, or will it ever, see skirmish use?
Has it, or will it ever, see skirmish use?
<a href="http://www.bcarms.com/"><img src="http://www.bcarms.com/images/store_logo.png" border="0"> </a>
-
dippydodo03
- Specialist
- Posts: 103
- Joined: Tue Jan 23, 2007 5:11 pm
- Location: michigan
That looks good. You need to cover the barrels.
Nice first post. WTF.Modderxtrordanare wrote:How is this a "gernade luncher?"
People that bash noobs can suck me!!!
-
imablackskater
- Specialist
- Posts: 143
- Joined: Sat Jan 13, 2007 5:52 pm
that thing is awesome i would cover those barrels since something so good should not go to waste
its some what a nozzle for a gun, i just call it a gernade launcher because it works like the real airsoft gernades not hand gernades,and yes i alleready have a cover for the tubes. this is photo of real airsoft gernade.:violent3:
- Attachments
-
- airsoft gernade.jpg (6.74 KiB) Viewed 5842 times
-
ProfessorAmadeus
- Sergeant
- Posts: 1046
- Joined: Fri Apr 28, 2006 5:39 pm
- Location: texas
What type of valve are you useing. Sorry if you already said it. It's too early 
SOO CUTE!! OMG!! I COULD JUST LICK YOU!!Insomniac wrote:Hey why am I a goose???? Why not somthing a little more awe inspireing, like an eagle or something? LOL
-
Modderxtrordanare
- Corporal 2
- Posts: 686
- Joined: Mon Nov 20, 2006 1:22 pm
- Location: Texas
Haha I didn't realize that was my first post, I could have sworn I'd posted before. Oh well. I wasn't trying to be rude with my earlier comments. Sorry if it came out like that.dippydodo03 wrote:That looks good. You need to cover the barrels.
Nice first post. WTF.Modderxtrordanare wrote:How is this a "gernade luncher?"
But back on topic.
I like the construction of this thing though. What is that metal thing towards the bottom? (with the threads on it)
Is it an end cap? Did you make that part yourself?