Bondo Vortex Block
-
Los Frijoles
- Private 2
- Posts: 38
- Joined: Mon Dec 12, 2005 7:22 pm
I am trying to make a BBMG before the summer ends and I do not have enough money for the smallest tub of bondo at my local auto shop. I am an extremely cheap person, so is there a better way to make a vortex block than out of bondo that will last a while?
-
Modderxtrordanare
- Corporal 2
- Posts: 686
- Joined: Mon Nov 20, 2006 1:22 pm
- Location: Texas
Send noname 5 dollars and he'll make you an inline vortex block, which is alot better than one in a Tee like I'm assuming you want to make.Los Frijoles wrote:I am trying to make a BBMG before the summer ends and I do not have enough money for the smallest tub of bondo at my local auto shop. I am an extremely cheap person, so is there a better way to make a vortex block than out of bondo that will last a while?
Or you can make one yourself.
Spudding since '05. Proud waster of plumbing and plumbing accessories.
-Wiki
-How-To: Modding a Sprinkler Valve
-Wiki
-How-To: Modding a Sprinkler Valve
-
singularity
- Corporal 5
- Posts: 982
- Joined: Mon Jun 26, 2006 10:53 pm
- Location: someplace
- Contact:
a small can is only like $6 last time i checked, which was yesterday when i went to my local ace hardware store. you could always try some type of hard wood...
be sure to check out my <a href="http://www.spudfiles.com/forums/ak-styl ... 9.html">AK Styled Vortex Gun</a> and my <a href="http://www.spudfiles.com/forums/at-4-t9627.html">AT-4 Rocket</a>
upcoming projects... finalized clip fed BBMG and ball point pen sniper
upcoming projects... finalized clip fed BBMG and ball point pen sniper
-
Fnord
- First Sergeant 2
- Posts: 2239
- Joined: Tue Feb 13, 2007 9:20 pm
- Location: Pripyat
- Been thanked: 1 time
- Contact:
Hardwood would probably work.
What I did was cut a small piece of pvc pipe and heat it in the oven until it softens. I unrolled it and put it between two bricks to make it flat.
After that I just cut the right sized square and drilled.
You will probably need to glue your pvc sheets together to make a thicker piece; the pipe I had was nearly .5 inches thick so I didnt need to do this.
What I did was cut a small piece of pvc pipe and heat it in the oven until it softens. I unrolled it and put it between two bricks to make it flat.
After that I just cut the right sized square and drilled.
You will probably need to glue your pvc sheets together to make a thicker piece; the pipe I had was nearly .5 inches thick so I didnt need to do this.
I made one out of this hard as hell peace of wood 
and it is a month and half old but it is breaking and i will proberly need to make a new one in the next 2 or 3 weeks but it only took like 1 hour to make so thats not so bad and it was free!!!!! 
Peace out
Kleon11
and it is a month and half old but it is breaking and i will proberly need to make a new one in the next 2 or 3 weeks but it only took like 1 hour to make so thats not so bad and it was free!!!!! Peace out
Kleon11