Portable Cloud BBMG.

[wannabie]

are you sure that that valve will let out enough air?

[jackssmirkingrevenge]

are you sure that that valve will let out enough air?

the man has a point, unless you´re using extrememly high pressure air and a tiny BB chamber, there's not going to be enough flow to spit out those BBs with any useful velocity.

[ammosmoke]

Yeah, that is possible..... However, the can could shoot thick chainlube about 20feet, so it couldn't be too bad, considering that the psi in those is relatively low. If I used propane it would definitely work good, due to its heat-absorbtion properties. If you have ever looked at the valve of a gas gun mag, they aren't very big.

EDIT: Anyway, how do you suggest I thread it in?

[jackssmirkingrevenge]

Chainlube and BBs are not analogous, I doubt you would get good performance. Still, if you want to try it out, some judicious use of epoxy would not go amiss

http://www.spudfiles.com/forums/bbmg-aerosal-t2582.html

[Suppressive Fire]

why not use the areosol can as the propelant? Just put a pill bottle or somethin filled with bbs right after the valve and have a barrel off the other side.

[origin unknown]

You could make your gun run off duster gas cans. They do get cold pretty quickly, but all you need is a short burst =P

EDIT: the valve won't have much flow though...

[ammosmoke]

Yeah, I knew that I could run it with duster gas, but I wanted to be able to refill. . Although,,, maybe I should try to put a shrader!!!!!

EDIT: Well, after reading the other posts from that links jack supplied, I have come to agree that the flow would not be very good. However, I think I am just going to do it anyway. Just because I am bored, and I want to experiment. However, it will probably be started on the 22nd, which is the day I get out of school.

[jackssmirkingrevenge]

I have come to agree that the flow would not be very good. However, I think I am just going to do it anyway. Just because I am bored, and I want to experiment.

If you want to experiment, why not try and make something that might work well, as opposed to something you know won't work?

[ammosmoke]

LOL, I just want to see if I can do it, and I don´t feel like going to the store right now. Of course, that is a good point, but I am probably going to do something that works well afterwards. I have a double-barreled breech loading shotgun in the planning stage.

[Redcoat]

ahem...........

[ammosmoke]

Ahem!?!? What are you trying to say here???

[rhys_pesantsrevolt]

yo H your gun was dicey when i first saw it how long did it take to mod it from the burger skewer to the can killing beast it is now plus you need to give it to me i love it i'll give you 200 yen. just kidding but still you need to show it to me.

------------------------------------------------------------------------------------- "what did i hear you say Australia rules where the ones who kept the imperial system at bay also our economy is growing and will soon pass the Americans" quote from my Grand father a WW2 veteran for the aussies sadly he died 5 years ago was a sad loss but he was a little racist

[Redcoat]

rhys it took like 10 minutes to mod it i just had some drills and elbow grease..............well he combination says it all.And i've dismantled it for my other gun which im still trying to get to work *modding blowgun as we speak*.

And get your fat arse back to school.