how does a cloud work?

[asianinvasion07]

wait y?

ive got good ghetto seals! =]


lol ill use epoxy on my next step

im going to cut the hose and the connector thing from a bike pump and fit my yellow hose and the cut end of the bike pump hose together, so i can use my ghetto hpa

ill probly use duct tape, epoxy, electrical tape, and MAYBE teflon

[asianinvasion07]

k i got my ghetto air source done, ill get a pic up soon and maybe a vid up later..

[asianinvasion07]

alright its all done, and yes the 2 hoses are held together with tape.. LOTS OF TAPE...... one hose was wrapped in teflon tape and fitted into the other for about 2 inches. then it was teflon taped all over, duct taped, teflon taped again, and electrical tape.. and it doesnt leak at 80 psi








that is a foam carrot covering the barrel

[jackssmirkingrevenge]

that is a foam carrot covering the barrel

... to lull the enemy into a false sense of security?



Or perhaps to keep within the vegetable scope of "spud"guns...turns out carrots might not be as good for your eyes as the hype would lead one to believe hehe

[thespeedycicada]

very very ghetto... i like it!

[asianinvasion07]

thanks, ther gonna keep getting more ghetto, haha

next is the cardboard M16

[windshrike]

Ha-ha-ha
That carrot just made my day .
I built a cardboard p90 using the guts of a nerf rapid-fire 20. Got about 200 fps. If I had figured out that a longer barrel would get 350 or so and I knew the basic blow-forward mechanism to get semi-auto back then I never would have taken it apart and ultimately broken it.
Word of advice asian: Never take something apart for parts if it works well. Chances are you'll regret it.

[asianinvasion07]

lol tight, me n my friend made one out of a nerf "powerclip" and were getting over 200 with it, but it was single shot only

[windshrike]

Just realized something: You are using a water bottle as the air tank.
That's a really bad idea. Try a soda bottle, they are made to hold pressure cause of the CO2.

[asianinvasion07]

it is true that that is a water bottle, but it is VERY strong, surprisingly...

just like propel and Gatorade bottles, they're almost indestructible

well, i lost the cap yesterday =p. i shot it off into the distance.... and it had the valve on it...... lol

so, im gonna make another tank with a 3 liter soda bottle. and i still have plenty of valves.

but yea, thanks for pointing that out, i was wondering how much more it could take..

[frankrede]

it is true that that is a water bottle, but it is VERY strong, surprisingly...

just like propel and Gatorade bottles, they're almost indestructible

well, i lost the cap yesterday =p. i shot it off into the distance.... and it had the valve on it...... lol

so, im gonna make another tank with a 3 liter soda bottle. and i still have plenty of valves.

but yea, thanks for pointing that out, i was wondering how much more it could take..

hahahahahah.
You think that water bottles are meant for pressure?
wow.
HAY DUD3 i's got en 1dea.
Take it to 800 psi, wait, how bout 150 psi, lets see how long it stays indestructible

[TwitchTheAussie]

my sarcasm metre just blew up.

[asianinvasion07]

hey...shhhhhh

this guns sweet..
haha


yea at 130 psi itll give..... but i didn't REALLY mean indestructible. i meant that they're thick bottles.

[frankrede]

hey...shhhhhh

this guns sweet..
haha


yea at 130 psi itll give..... but i didn't REALLY mean indestructible. i meant that they're thick bottles.

and pvc is dwv is many times thicker, yet copper pipe is very thin in comparision while it holds hundreds of psi.

[asianinvasion07]

dont forget my goal was to make this thing bootleg as possible

im not trying to argue, but its the truth, i am trying to make a gun from trash, but i had 2 buy the hose and blowgun which costed me like 15...