SpudFiles

here she is, it has a fairly small vortex block, me and my dad made it out of red oak, it is housed inside a 1" tee, with a 1 inch to 3/4" brushing, and i have glued a half an inch peice of pvc wraped in electric tape into the 3/4 of an inch pipe, and glued the sawn off blowgun into the pvc pipe, the barrel is bic pens, and on the outside is 1 inch pvc, and the handle on the rear is a 45 degree angle 1 inch pvc joint, and some 1 inch pvc and an endcap, havent tried it yet, as the glue is still curing, i shall try it after school tommorrow, i am onky 12 years old, so school is a priority, i shall get up some damage pics if it works, and i will operate it at about 80-90 psi, i have an airtank, i asked pvc arsenal if i could copy his design of his unconventional cloud, and he said yes, so i had copied his original design a little, but it is more extended, and the handle is slightly diffrent, and there are no hoses, and there is a barrel cover, and no plug, enough with the chit chat, there she is.
[img][img]http://img40.picoodle.com/img/img40/9/9/10/t_vortexbbmg0m_b48047a.jpg[/img][/img] the hole gun

[img][img]http://img35.picoodle.com/img/img35/9/9/10/t_vortexbbmg0m_47ef334.jpg[/img][/img] inside the barrel looking down

[img][img]http://img40.picoodle.com/img/img40/9/9/10/t_vortexbbmg0m_c8bbdd3.jpg[/img][/img] the back of the vortex block
[img][img]http://img03.picoodle.com/img/img03/9/9/10/t_vortexbbmg0m_2011946.jpg[/img][/img] handle detached for reloading, just pull it off, load and push it back on, th epipe is plugged with hot glue and clay.

It looks like a pretty good gun from what I can tell, but would it be possible to take some pictures that don't look like they were taken through a fish tank?

yeah, my hand was just shaky, i will take some more another time.

cell phone cam? that or is your flash broken? would be great if you could post some slightly better quality pictures

i will, and i tried it prematurelly, just about 10 minutes ago, and it empteid about 30 bbs in less than a second, i like it, damage pics tommorrrow.

she is a beauty! i wanted to make one like this. is it airsoft or .177 cal? if u ever take out the block i would like to see a pic of it next to a quarter or something for size comparison, never seen one this small. good job!

ok, it is just over the size of a quarter, it works just as planned, and it shoots airsoft, i am not alowed to shoot .177 cal. the vortex block was a lot of work because of how hard the wood is, my dad cut out the half circle, and the outside of the block. i was trying to make it more compact, like the unconventional cloud, but i didnt, i tthink i might shorten it later, off to school, so i gotta go, see ya.

i will get damage pics up asap, i just had to fix my tank, i overpressurized it, and it was a soda bottle, i am almost done with the new pvc one.

nice gun very basic and very good i so need to make one lol. using BB's would it be safe to skirmish with your mates? at about 100psi?
Cheers Nato

Hmmmmmmm

That depends on what guns your friends have.
cheers

Sorry had to edit due to poor grammar. Im going to make 3 replicas of this gun would it hurt firing bbs at each other??

it will sting a little, but it will be fine, it shoots at about 250 fps. i would love to see your replicas when ur done. it took me about an hour to make, really simple.