Paintball airsoft question
-
fretmelter
- Private 4
- Posts: 66
- Joined: Mon Jul 09, 2007 9:34 pm
ok i have this idea for a airsoft gun froma paintball gun. now my question is what do u think would shoot a plastic bb harder? The gasses in a paintball gun tht usually shoot the ball out. OR if i used the hammer in the paintball gun to puch the pistion device used in other airsoft guns? The hammer would hit really hard and fast but i dont know if it would be better then the air it uses to shoot a paintball.
Last edited by fretmelter on Thu Dec 13, 2007 4:42 pm, edited 1 time in total.
Use Air, much more adjustable and you can pressure it up higher than the piston can hit
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>Yea, that's definitely going to get you at least a tazer.
facebook.com/biggrib
-
jrrdw
- Moderator
- Posts: 6572
- Joined: Wed Nov 16, 2005 5:11 pm
- Location: Maryland
- Has thanked: 39 times
- Been thanked: 22 times
- Contact:
What he said, and use a QEV for your firing valve. Easy to build, and work great!BigGrib wrote:Use Air, much more adjustable and you can pressure it up higher than the piston can hit
-
fretmelter
- Private 4
- Posts: 66
- Joined: Mon Jul 09, 2007 9:34 pm
no no i dont need a QEV i was either ganna use the paintball gun to fire it or the paintball guns hammer to hi the piston
also using the paintball guns air meens carry air with me but the hammer hitting the piston deosnt need air.
also using the paintball guns air meens carry air with me but the hammer hitting the piston deosnt need air.
youd get a lot more power using the gases, the piston moving in the paint ball gun is too short also too slow considering its used for loading the paintball, it has to be slow enogh not to rupture the paint ball, and hav it load under gravity. i would try just loading the hopper with bbs and see what would happen, it be like an auto-shotty-sniper it would be sick and easy to do
-
fretmelter
- Private 4
- Posts: 66
- Joined: Mon Jul 09, 2007 9:34 pm
ok well dark milk kindo understands but i just tried to get the bbs to load and they wouldnt load. Which destroys my whole plan anyway. sooo now im not sure what to do.
-
experament-u2
- Specialist 4
- Posts: 469
- Joined: Tue Dec 26, 2006 11:18 pm
just make a bit of a sleeve around a bb barrel and put it down inside the paint ball barrel, that will give you a single shot kind of gun
but if u want it to be semi i recommend doing something like jack did and his blow forward bolt thingy
but if u want it to be semi i recommend doing something like jack did and his blow forward bolt thingy
-
fretmelter
- Private 4
- Posts: 66
- Joined: Mon Jul 09, 2007 9:34 pm
to experament
tht is exactly what i did. but the when i simulated bbs loading when the bolt was seally the chamber. So the bbs are just siting above the bolt. Then i moved the bolt back to simulate relaoding and the bbs dropped in fine BUT NONE of the bbs fell in the little half round cutout on the barrel.
tht is exactly what i did. but the when i simulated bbs loading when the bolt was seally the chamber. So the bbs are just siting above the bolt. Then i moved the bolt back to simulate relaoding and the bbs dropped in fine BUT NONE of the bbs fell in the little half round cutout on the barrel.