has any way ever done this before, or had an idea about it ??
i thought if you could get a weaker spring or keep the same one and put a strong one on the hammer this could be an easy way of getting a ready made no leak hammer valve. just by taking the lock ball bearings and outer cover ive just about modified this already. A good thing about this is that you know its no going to leak !! and hopefully go up to highish pressures but i dont have the pumps to do that so ill be staying around 50-150 psi .
ill have to add something to make it move a bit further away from the valve so that the hammer can gain more speed to be able to open the valve.
update #1
ok ive finished the valve and just attached a male adapter to fit my compressor and just by me pushing slightly on the barrel, which is from my A24d which broke the other day so i wanted a new hammer valve so i made this from old parts.
the power is amzing for this little thing
Modified female Compresser adapter for hammer valve
-
ghostman01
- Specialist 3
- Posts: 372
- Joined: Fri Nov 23, 2007 9:15 am
- Attachments
-
- what it will look like eventually something to this effect
-
- parts of the modified female adapter
-
- picture with female adapter, male adapter and barrel
-
- finished valve
-
super spuder
- Corporal
- Posts: 558
- Joined: Fri Apr 06, 2007 9:05 pm
- Location: Ontario Canada
looks like a pretty sweet set up. That is amazing you didnt get any leaks.
trying to decide on a new project, probably something small.
-
ghostman01
- Specialist 3
- Posts: 372
- Joined: Fri Nov 23, 2007 9:15 am
yeah well all it is, is a modifed female adapter that male one doenst come in anywhere now but it think i need a weaker spring on the valve. i have installed it in to my gun and im only getting maybe 200fps out of it pretty crap when my other gets around 450 or so and they were all most exactely the same. it either that or i put more rubber bands on the barrel lol
-
judgment_arms
- Sergeant 3
- Posts: 1272
- Joined: Tue Oct 17, 2006 8:49 pm
- Location: Not so beautiful North Carolina, but at least it’s the U.S.A.!
I had the same idea, only I plan on using it to pilot a piston valve.
-
Gippeto
- First Sergeant 3
- Posts: 2504
- Joined: Sat Jan 19, 2008 10:14 am
- Location: Soon to be socialist shit hole.
- Has thanked: 2 times
- Been thanked: 17 times
Piloting a piston valve with a hammer valve? Now where have I seen that before? 
"It could be that the purpose of your life is to serve as a warning to others" – unknown
Liberalism is a mental disorder, reality is it's cure.
Liberalism is a mental disorder, reality is it's cure.
-
judgment_arms
- Sergeant 3
- Posts: 1272
- Joined: Tue Oct 17, 2006 8:49 pm
- Location: Not so beautiful North Carolina, but at least it’s the U.S.A.!
I thought the same thing when I saw your cannon.Gippeto wrote:Piloting a piston valve with a hammer valve? Now where have I seen that before?
-
Gippeto
- First Sergeant 3
- Posts: 2504
- Joined: Sat Jan 19, 2008 10:14 am
- Location: Soon to be socialist shit hole.
- Has thanked: 2 times
- Been thanked: 17 times
Yet another egg/chicken thing?
Oh-well, "Great minds think alike!" ?
Who cares... let's punch holes in stuff!
Oh-well, "Great minds think alike!" ?
Who cares... let's punch holes in stuff!
"It could be that the purpose of your life is to serve as a warning to others" – unknown
Liberalism is a mental disorder, reality is it's cure.
Liberalism is a mental disorder, reality is it's cure.
-
judgment_arms
- Sergeant 3
- Posts: 1272
- Joined: Tue Oct 17, 2006 8:49 pm
- Location: Not so beautiful North Carolina, but at least it’s the U.S.A.!
AMEN!Gippeto wrote: Who cares... let's punch holes in stuff!
-
ghostman01
- Specialist 3
- Posts: 372
- Joined: Fri Nov 23, 2007 9:15 am
.........lol...........
-
ghostman01
- Specialist 3
- Posts: 372
- Joined: Fri Nov 23, 2007 9:15 am
no its not i agree but its because of that small hole area the air pass through. and if i find a weaker spring it might be better .......