SpudFiles

semi-automatic breech loading airsoft rifle (BLAIR wasnt that the name of a premier?)
This is going to my summer vacation project, i have a new super "lathe" and some other tools. I'm going to build it ant-style, so I can save some money for euhh.... mynext gun .

The valve of the gun is based off a blow-forward valve, the piston is connected to a rod that open or closes the breech. So far it's the most simple gun I ever build , thats probably why it is working . I have made a simple diagram I will make a detailed later .

16:46 11-7-2008
I made the valve, the valve housing. currently working on the part that connects the breech loading to the valve outlet. I really like the part of the moving bolt, makes the gun very realistic 8) .

http://s153.photobucket.com/albums/s204 ... et archive
G's from the Dutch, Tom

Tom wrote:(BLAIR wasnt that the name of a premier?)

You couldn't have chosen a worse one to name it after. well, perhaps "Brown" hehe

And I believe this was the archive you meant to link to good luck

jackssmirkingrevenge wrote:

Tom wrote:(BLAIR wasnt that the name of a premier?)

You couldn't have chosen a worse one to name it after. well, perhaps "Brown" hehe

And I believe this was the archive you meant to link to good luck

Is he that bad , thanks but don't you have anything to say like blablabla that is not good too much this and that?
Tom

Which exactly is the diagram of what you intend to build? Some detailed captions would be helpful

Tadaaaaaa, this is the simple diagram havent got time for the detailed one.
Tom

And this is going to be fed by that nifty blowgun?

LOL no this is going to be fed by a ...... euhh.... blow gun for in the garden. They have alot of flow. Il promise
Tom
PS: the drawing is not to scale

jackssmirkingrevenge wrote:You couldn't have chosen a worse one to name it after. well, perhaps "Brown" hehe

It could be worse - he could be making a High Inductance Tail Levelled Electromagnetic Rifle or maybe something like a Gas Worked Burstdisc Underlever Steel Hybrid.

Not forgeting the Pneumatically Operated Low Pressure Optically Targeted launcher hehe. But seriously, vote BNP!

Ragnarok wrote:

jackssmirkingrevenge wrote:You couldn't have chosen a worse one to name it after. well, perhaps "Brown" hehe

It could be worse - he could be making a High Inductance Tail Levelled Electromagnetic Rifle or maybe something like a Gas Worked Burstdisc Underlever Steel Hybrid.

GiGlE GiGlE that is a good design that you have I am guessing it isn't to scale? somthing about the breach? Never mind.

As I said before no it isn't to scale, man that would be overkill .

Tom wrote:Tadaaaaaa, this is the simple diagram havent got time for the detailed one.
Tom

Hum... s'cuse the silly question, but i dont see the bolt that block air from going into the magazine tube, where is it on the diagram?

When i trigger the valve, the air pushes the bolt forward. when it has reached the hole that is connected to the breech the air will flow into the breech, because there is no more force on the bolt from the air. The spring pushes the bolt back and tadaa ready to cycle again.
G's from the Dutch, Tom

Tom wrote:When i trigger the valve, the air pushes the bolt forward. when it has reached the hole that is connected to the breech the air will flow into the breech, because there is no more force on the bolt from the air. The spring pushes the bolt back and tadaa ready to cycle again.
G's from the Dutch, Tom

Yup, makes sense. I was just taking as granted that there is a bolt that blocks the magazine when air flows into the barrel, just like in many blow forward design. But i guess you must just let the air get into the magazine and not care because it's sealed by a cap.

Hey Tom, looks pretty nice till now:) Haha ant-style.. lol Thats a good one. Simplicity is always beta. Well k good luck with finishin the gun, I cant wait to c some motionpics (video)