Need diagram of 760 crosman
- Sticky_Tape
- Sergeant 2
- Posts: 1175
- Joined: Thu Jan 31, 2008 6:35 pm
- Location: Sydney, Nova Scotia, Canada.
Does anybody know a good website for pellet/bb gun diagrams? I need to see the internals of a crosman 760 pumpmaster.
You can tell how awesome a cannon is by the pressure used.
http://www.spudfiles.com/forums/high-pr ... 12803.html
xnt rnm ne z ahtbg
http://www.spudfiles.com/forums/high-pr ... 12803.html
xnt rnm ne z ahtbg
- john bunsenburner
- Sergeant 5
- Posts: 1446
- Joined: Sun Oct 19, 2008 5:13 am
http://airgundevelopment.com/valve.html
http://www.airgundevelopment.com/crosman2200.html
it is about the crossman 2200 but i am pretty sure the valve will be similar or the same.
http://www.airgundevelopment.com/crosman2200.html
it is about the crossman 2200 but i am pretty sure the valve will be similar or the same.
"Did you ever stop to think that out of the seven deadly sins envy is the only one which doesn't give the sinner even momentary pleasure"-George Will
- Gippeto
- First Sergeant 3
- Posts: 2504
- Joined: Sat Jan 19, 2008 10:14 am
- Location: Soon to be socialist shit hole.
- Has thanked: 2 times
- Been thanked: 17 times
Have a look here. You'll have a few to choose from.
http://www.crosman.com/airguns/service/ ... man-rifles
http://www.crosman.com/airguns/service/ ... man-rifles
"It could be that the purpose of your life is to serve as a warning to others" – unknown
Liberalism is a mental disorder, reality is it's cure.
Liberalism is a mental disorder, reality is it's cure.
- Sticky_Tape
- Sergeant 2
- Posts: 1175
- Joined: Thu Jan 31, 2008 6:35 pm
- Location: Sydney, Nova Scotia, Canada.
Thanks guys, I was wondering if it would be possible for me to mod a cheap 760 for higher volocity 700+FPS.
You can tell how awesome a cannon is by the pressure used.
http://www.spudfiles.com/forums/high-pr ... 12803.html
xnt rnm ne z ahtbg
http://www.spudfiles.com/forums/high-pr ... 12803.html
xnt rnm ne z ahtbg
- john bunsenburner
- Sergeant 5
- Posts: 1446
- Joined: Sun Oct 19, 2008 5:13 am
I suggest building your own hammer valve, it is alot cheeper and can be made to any dieired size also you can understand how it works and so improve apon it and be sure it holds the pressure needed.
"Did you ever stop to think that out of the seven deadly sins envy is the only one which doesn't give the sinner even momentary pleasure"-George Will
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
Several mods you can do:Sticky_Tape wrote:Thanks guys, I was wondering if it would be possible for me to mod a cheap 760 for higher volocity 700+FPS.
-longer barrel
-stronger hammer spring
-heavier hammer
-bored out valve and transfer ports
-weaker valve spring
- Gippeto
- First Sergeant 3
- Posts: 2504
- Joined: Sat Jan 19, 2008 10:14 am
- Location: Soon to be socialist shit hole.
- Has thanked: 2 times
- Been thanked: 17 times
Sticky, the Canadian version has a pressure relief valve threaded into the valve chamber.
Those that I've "worked on" had a hex head screw accessible through a hole in the plastic. It's just a bit in front of the trigger guard, on the bottom.
Turn the screw in snug and see the difference.
And yes, you can get 700+ fps out of it, but you'll need to "open 'er up".
Those that I've "worked on" had a hex head screw accessible through a hole in the plastic. It's just a bit in front of the trigger guard, on the bottom.
Turn the screw in snug and see the difference.
And yes, you can get 700+ fps out of it, but you'll need to "open 'er up".
"It could be that the purpose of your life is to serve as a warning to others" – unknown
Liberalism is a mental disorder, reality is it's cure.
Liberalism is a mental disorder, reality is it's cure.
http://www.zdspb.com/tech/misc/animations.htmlSticky_Tape wrote:Does anybody know a good website for pellet/bb gun diagrams?
Alot of animated diagrams.
Though these diagrams are more general. I am not sure if you will find the right one for your specific marker.