co2 BBMG cloud WIP

Marffy · Tue Jan 26, 2010 10:34 pm

I'm building a full auto pistol for airsoft. So far i made the whole cloud bbmg setup but without the trigger/ air source thing. I will be using a co2 tire filler for this. I'm just posting this to see if you guys have any suggestions before i finish.

clemsonguy1125 · Wed Jan 27, 2010 3:55 pm

um just a warning ive heard that the co2 tire filler only last 3 seconds with each cartridge

Wed Jan 27, 2010 4:09 pm

I'd be more worried about the freezing 800 to 900 psi coming out in those few seconds.

It will be enough to blow up the bbmg in case of a jam...and just to make sure it will make the PVC brittle with the extreme cold at the same time.

You'd be better off with metal..

Marffy · Wed Jan 27, 2010 7:10 pm

clemsonguy1125 wrote:um just a warning ive heard that the co2 tire filler only last 3 seconds with each cartridge

I've been testing the gun with a co2 inflator. It failed. all i got was about 4 good seconds of air flow and it couldn't penetrate cardboard. i'll have to get a better idea.

clemsonguy1125 · Wed Jan 27, 2010 7:23 pm

Well read this, JSR is currently doing some testing for a airpistol using a trie inflator which could also work as a bbmg.
http://www.spudfiles.com/forums/home-ma ... 20174.html