Question about Vortex
should the bbs just fit in the vortex or should they be able to move side to side as well?
E-mail me about custom cannons, Pneumatic and Combustion
-
MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
http://www.burntlatke.com/bb.html took me 1min of searching in google kyle you have a habbit of doing this, next time just remember to search first....the burnt latke link there has step-by step instructions on how to build it.
yea, jeez u always do that for any question i ask
E-mail me about custom cannons, Pneumatic and Combustion
-
MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
it tells you on the how-to though and what to drill bit to use i recall.
and the reason ive done this to 3 of your questions is because they are all topics answered in other posts that take 2min to find on this forum.and you made 4 topics all on pistons on the same day,why didnt you just make one topic with 4 questions?
Quote from that link i gave you:
"The BB exit hole can be drilled at 3/16" (.1875) or similar. This hole is tougher to align as the sides of the block are not parallel. Use shims, guidelines and maybe a square (CD cover) to get this hole exactly right. Both entry and exit holes should form a smooth tangent from the vortex hole with no bumps or dips."
and the reason ive done this to 3 of your questions is because they are all topics answered in other posts that take 2min to find on this forum.and you made 4 topics all on pistons on the same day,why didnt you just make one topic with 4 questions?
Quote from that link i gave you:
"The BB exit hole can be drilled at 3/16" (.1875) or similar. This hole is tougher to align as the sides of the block are not parallel. Use shims, guidelines and maybe a square (CD cover) to get this hole exactly right. Both entry and exit holes should form a smooth tangent from the vortex hole with no bumps or dips."