cloud in progress
I'm in the middle of making a cloud I'm using 1 1/2 inch pvc and a 5/16 brake line if all goes well i should be done in a few hours. if you have any suggestions before i put it together please post them.
"Those who are different change the world. Those who are the same keep it that way"
-
Legendpilot
- Private 4
- Posts: 66
- Joined: Wed Jan 03, 2007 5:52 pm
-
spudthug
- Corporal 5
- Posts: 936
- Joined: Mon Feb 26, 2007 9:02 pm
- Location: johnsonburg, Pa USA
- Contact:
should turn out good but what do you use to shoot??bbs or airsoft?
4" piston valved cannon-half done..( i spilt my cement...)
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
-
zeigs spud
- Corporal 2
- Posts: 657
- Joined: Tue Apr 04, 2006 10:39 pm
plz don't duble post (backseat mod ^_^)
but yeah. so what is a cloud? i have never heard of this before. is it just another name for a hopper with a barrel that hooks up to a air compressor?
but yeah. so what is a cloud? i have never heard of this before. is it just another name for a hopper with a barrel that hooks up to a air compressor?
a cloud is a air input (commonly on the bottem) and an air out put or barrel. you fill the chamber with BBs and hook an air commpresser that blows air in causing the bbs to swirl around in the chamber causing a "cloud" of BBs and the only for the air to ecapr is out the barrel sucking the bbs out with it. it is a very easy way to make a airsoft machine gun.
"Those who are different change the world. Those who are the same keep it that way"
The <a href="http://www.spudfiles.com/spud_wiki/inde ... pg">purple primer</a> paint job is always cool. 
Damn, I just search 10 minutes for that page.
Damn, I just search 10 minutes for that page.