hp bb mg idea
Posted: Sun Apr 22, 2007 8:40 pm
i came up with the idea of making a high power bb machine gun. it uses a electric motor to spin a flywheel that has noch that pushes a rod that connects to a button valve
Page 1 of 1
Posted: Sun Apr 22, 2007 8:43 pm
Why not just make a cloud type bb gun? And what kind of valve would this be using and would the pushrod setup have enough force to actuate it? And using an electric motor requires more equipment which entails more weight. So my question is why?
Posted: Sun Apr 22, 2007 8:47 pm
its just something difrent. :wav:
Posted: Sun Apr 22, 2007 8:51 pm
Sounds good, tricky to make probably but what the hell, go for it.
Posted: Sun Apr 22, 2007 9:16 pm
i do alot of machineing so its easy
Posted: Sun Apr 22, 2007 9:30 pm
it would be an interesting project if you could make the motor alternately open the valve and close the breech and vice versa to give single shots.
Otherwise, you could do both in a simple motion by machining a valve as SPG had proposed back on spudtech:
Otherwise, you could do both in a simple motion by machining a valve as SPG had proposed back on spudtech:
Posted: Tue Apr 24, 2007 5:29 am
Yeah, try a ball valve....... in fact, this was an idea i tried implementing on my bike to shoot paintballs once.......
Posted: Sun May 20, 2007 3:43 pm
Sounds like a good idea.
Posted: Thu Aug 16, 2007 11:48 am
im going to make it for paintball insted
Posted: Fri Aug 17, 2007 1:38 am
great idea but yeah if you make a good enough cloud it will be hella powerful.
But its a god idea and for paint ball it could work.Hell, if you had a big enough air source you may be able to build a paint ball cloud?.
Ps. You spelt motor wrong.
But its a god idea and for paint ball it could work.Hell, if you had a big enough air source you may be able to build a paint ball cloud?.
Ps. You spelt motor wrong.
Posted: Fri Aug 17, 2007 2:13 am
But you dont do alot of "correct-spelling"!spudling wrote:i do alot of machineing so its easy
Yeah, and just about every other word more than one syllable longredcoat wrote:Ps. You spelt motor wrong.
Anyways... If you going to use that design of JSR's, make sure your spin isnt too fast, otherwise the paintballs will jam as the valve closes. I like the idea though, so you should go ahead with it if you feel the urge to.
Posted: Fri Aug 17, 2007 4:01 am
I like JackSmirkingRevenge's idea.It would be nice to see it in action. 
.
...........and its effectiveness. .
Happy SPuddin'
............and its effectiveness.
.Happy SPuddin'
Posted: Fri Aug 17, 2007 9:36 am
If you still want to use an external motor to load and fire the projectiles, have a look at this thread (scroll to the last post on the first page) - there's a few other configurations you might want to consider.
Posted: Fri Aug 17, 2007 11:37 am
I say go for your original idea, but make the motor have a larger gear then the wheel that actuates the rod, it will give you a higher ROF.