Page 1 of 1
My 1st portable bbmg
Posted: Mon Jun 18, 2007 6:44 pm
by beebs111
well, this is my first bbmg , threw it together out of things i had laying around im my basement. hope you like it. i am only charging the air chamber to 55 psi because the glue isn't dry yet and is not rated for pressure(conduit glue)
Posted: Mon Jun 18, 2007 6:46 pm
by Kenny_McCormic
not bad for a cloud
Posted: Mon Jun 18, 2007 6:52 pm
by A-98
ghetto?
i guess its pretty neat, not much for looks tho.
EDIT: muahahaha custom-title ability is mine! all mine!
what to get....
Posted: Mon Jun 18, 2007 7:16 pm
by Fnord
Whatever title you choose, try not to start a religion again.
Beebs, that is really good for a free gun. Is the chamber 2" pvc?
Posted: Mon Jun 18, 2007 7:35 pm
by Flying_Salt
A-98 wrote:
EDIT: muahahaha custom-title ability is mine! all mine!
*cough*post whore
Nice cloud. I may get around to making a portable one like that, seeing as I don't have an air compressor. Does putting a hose on it change preformance? It looks kinda flimsy with just a blowgun between them.
Posted: Mon Jun 18, 2007 10:37 pm
by jackssmirkingrevenge
Nice, I like that you've gone with the compact "over-under" layout instead of the more bulky "inline" configuration most people seem to choose. Might I suggest a bit of support between the BB chamber and the air chamber, looks a bit fragile as it is.
Posted: Mon Jun 18, 2007 11:33 pm
by A-98
*cough*post whore
actually, i didnt notice that i was that close, and just looked.
Whatever title you choose, try not to start a religion again.
ill try my hardest, no gaurantees tho. if it happens i can change it.
on topic: i actually might make one of these, except with a .177 cal barrel.
Posted: Tue Jun 19, 2007 8:30 pm
by Fnord
if it happens i can change it.
I dont think you can change it unless you get another 1200 bucks.
A mod can change it back, though. I noticed SB15 got his changed from "Mr. ABS" to the default after his abs gun blew up:)
Posted: Wed Jun 20, 2007 2:56 am
by TwitchTheAussie
_Fnord wrote:if it happens i can change it.
I dont think you can change it unless you get another 1200 bucks.
A mod can change it back, though.
I noticed SB15 got his changed from "Mr. ABS" to the default after his abs gun blew up:)
Lol that explains a few things. Now I like this but that needs a support underneath the cloud chamber its starting to look like it could break.
Posted: Wed Jun 20, 2007 10:28 pm
by beebs111
its not flimsy at all, jsut an optical illusion, its actually pretty sturdy, chamber= 1.5" chamber=3/4"
Posted: Thu Jun 21, 2007 6:42 am
by simo
why did u attach the blow gun like that there must be a leak use a hose
Posted: Fri Jun 22, 2007 7:33 am
by beebs111
that eliminates the entire point of it being compact, i used teflon tape, which eliminate the leak
Posted: Thu Jun 28, 2007 2:38 am
by mr. sjiamdon
simo wrote
why did u attach the blow gun like that there must be a leak use a hose
beebs111
that eliminates the entire point of it being compact, i used teflon tape, which eliminate the leak
im with simo im pretty sure there is a little leak because there is no support the blowgun is holding the the airchamber and the bb chamber so the gun must have a leak.
u should but cable ties at the end of the airchamber connecting to the bb chamber wich will give support the the blowgun
[/quote]