its a gun! this is my pen gun i made from a broken Parker pen, it looks just like it did before i started except the part when you push the button it shoots something, check it out!
barrel: 50mm x 2.5mm brass tube
chamber: pen
valve: schrader
firing mechanism: modified pen cap
pen: 130mm
finally got a video
[youtube][/youtube]
Posted: Tue Aug 10, 2010 7:08 pm
by clemsonguy1125
Looks good, I really like it.
Posted: Tue Aug 10, 2010 7:11 pm
by ilovefire
clemsonguy1125 wrote:Looks good, I really like it.
thanks but im dying to try it when i get my shock pump, haven't been able to get more then a tiny puff of air out of it
Posted: Tue Aug 10, 2010 8:01 pm
by clemsonguy1125
Ive taken mine up to 125 on my bike pump because I dont have my shock pump yet either, I could put a nail into a coke can, you should be able to do some testing. Good Luck
Posted: Tue Aug 10, 2010 9:06 pm
by ilovefire
clemsonguy1125 wrote:Ive taken mine up to 125 on my bike pump because I dont have my shock pump yet either, I could put a nail into a coke can, you should be able to do some testing. Good Luck
yea i have shot it at a max of about 40psi because with a leaky hand pump there is only so far you can go
Posted: Tue Aug 10, 2010 9:35 pm
by clemsonguy1125
Have you ordered the shock pump yet, I cant wait to see some damage pics and a video if possible.
Posted: Tue Aug 10, 2010 10:44 pm
by ilovefire
clemsonguy1125 wrote:Have you ordered the shock pump yet, I cant wait to see some damage pics and a video if possible.
yea i ordered it a couple days ago and it has supposedly been shipped but it has to come from the US to here in AU, hopefully it will get here next week but it will probably take longer
and is it just me or dose when you go to mini cannon showcase the thumbnail for this is show up massive?
Posted: Tue Aug 10, 2010 11:58 pm
by Gippeto
Nice work!
Now PLEASE resize your thumbnail pic...that's bloody annoying.
Posted: Wed Aug 11, 2010 12:18 am
by ilovefire
Gippeto wrote:Nice work!
Now PLEASE resize your thumbnail pic...that's bloody annoying.
thanks and yea i wasnt sure how that happened ill have to do that soon then
Posted: Wed Aug 11, 2010 3:19 am
by ilovefire
sorry but for some reason it wont let me upload a new thumbnail
Posted: Wed Aug 11, 2010 4:54 am
by POLAND_SPUD
I am pretty sure that JSR ji#### his pants when he saw it
Posted: Wed Aug 11, 2010 5:49 am
by ilovefire
POLAND_SPUD wrote:I am pretty sure that JSR ji#### his pants when he saw it
thanks.... it think...
Posted: Wed Aug 11, 2010 7:30 am
by Crna Legija
ilovefire wrote:
POLAND_SPUD wrote:I am pretty sure that JSR ji#### his pants when he saw it
thanks.... it think...
thats all ways a good thing
Posted: Wed Aug 11, 2010 7:52 am
by inonickname
-_- wrote:
ilovefire wrote:
POLAND_SPUD wrote:I am pretty sure that JSR ji#### his pants when he saw it
thanks.... it think...
thats all ways a good thing
Unless of course, you're a latino streetwalker.
It's beautiful! as long as you roughened the epoxy-bound surfaces well, I'd be very confident in taking that as far as a shock pump will give out. I used 5 minute epoxy on my last pengun, and it's 100% leakfree and it's structural integrity is fine. Roughening is definitely the key.
Posted: Wed Aug 11, 2010 5:03 pm
by ilovefire
inonickname wrote:It's beautiful! as long as you roughened the epoxy-bound surfaces well, I'd be very confident in taking that as far as a shock pump will give out. I used 5 minute epoxy on my last pengun, and it's 100% leakfree and it's structural integrity is fine. Roughening is definitely the key.
thank you, yes i did roughen it a bit probably could have done some more but ill put it under something when i fill it first, and i have been able to get 80psi into it but there is a small leak from the piston not sealing properly could higher pressure fix this?
thanks
