Page 1 of 3
mini hybrid cannon
Posted: Mon Sep 13, 2010 1:42 am
by ilovefire
this is my mini hybrid cannon inspired by
JSR's mini hybrid.
barrel; 40cm x .5cm
chamber; 11cm x 1.3cm
chamber volume; 13ml
valve type; burst disk - photo paper
fill valve; schrader
spark gap; .5mm - .25mm
fueling; directly injected into the chamber with syringe
ignition; 9v DC ignitor
fuel; butane
well here are some pics tell me what you think!
this shot was at 11x with a 4.5mm steel bb at point blank, hopefully i can get a vid soon
Re: mini hybrid cannon
Posted: Mon Sep 13, 2010 2:01 am
by jackssmirkingrevenge
Looking good!
We need more details though, mix number, projectile type, filling system (are you injecting directly into the chamber or are you using a separate premixed chamber?) etc.
oh, and videos!
ilovefire wrote:(can someone PM me on how to put a link on some text or where i can find out how?)
Easy, (url=
http://www.spudfiles.com/forums/mini-hy ... 21655.html)your text here(/url)
Just replace
( and
) with
[ and
]
Posted: Mon Sep 13, 2010 3:13 am
by CpTn_lAw
I love this mini-hybrid mania here
Nice gun!! And, as JSR stated, we need more infos!
Posted: Mon Sep 13, 2010 3:25 am
by ilovefire
just edited the post, please tell me if there is anything else i forgot to add
and thanks for the help JSR
Posted: Mon Sep 13, 2010 7:14 am
by jakethebeast
yeah this mini hybrid mayhem is the best, every day something new to read
just tell me what is that copper thing
Posted: Mon Sep 13, 2010 7:24 am
by ilovefire
jakethebeast wrote:yeah this mini hybrid mayhem is the best, every day something new to read
just tell me what is that copper thing
yea i love this thing i think im addicted to the mini hybrid stuff wouldnt mind trying a bolt action cartridge
oh yea i probably sould have said this before, its a mini refillable lighter refill i made, makes it a bit easier then having to use one of those big bulky ones
Posted: Mon Sep 13, 2010 11:44 am
by jackssmirkingrevenge
Good stuff, what are you using for a burst disk?
Posted: Mon Sep 13, 2010 3:55 pm
by Gun Freak
Did you use syringe epoxy or a different type? Building a hybrid is very intriguing... lol. Looking very good, have you tried higher mizes yet?
Posted: Mon Sep 13, 2010 9:04 pm
by ilovefire
jackssmirkingrevenge wrote:Good stuff, what are you using for a burst disk?
oh yea right im using photo paper like you, and i score it when i use it at low mixtures
Gun Freak wrote:Did you use syringe epoxy or a different type? Building a hybrid is very intriguing... lol. Looking very good, have you tried higher mizes yet?
yes i do use syringe epoxy iv got some 30min 3500psi stuff so that is hopefully enough, i think the highest i have gone is 11x but might try 15x soon
Posted: Tue Sep 14, 2010 12:26 am
by jackssmirkingrevenge
Good luck with higher mixes, I have to say this looks really good, it's even more mini than mine at 5mL less chamber volume. I have plans to go even smaller though
Posted: Tue Sep 14, 2010 1:44 am
by ilovefire
jackssmirkingrevenge wrote:Good luck with higher mixes, I have to say this looks really good, it's even more mini than mine at 5mL less chamber volume. I have plans to go even smaller though
well i just took it to 15x and i am quite impressed i should have some pics soon, it is also not my smallest and is a beast compared to my 3ml
ill try get some pic of that to
edit: got some more damage pics both were done at 15x with 4.5mm steel bbs
Posted: Tue Sep 14, 2010 9:21 am
by SpudFarm
Impressive
Posted: Tue Sep 14, 2010 10:03 am
by jackssmirkingrevenge
SpudFarm wrote:Impressive
Agreed!
Seems that after the pengun revival, the mini-hybrid revolution is spreading now
Posted: Tue Sep 14, 2010 10:06 am
by jakethebeast
yeah, now im building my own
Posted: Tue Sep 14, 2010 8:07 pm
by bighead33
what is this thing you shot at?
