Oh come one it doesnt look that bad, my camera wont take good photo's up close so that's the best I can get.
If I had an arc welder or something i would have welded it but there is no other way I could have done this. I would advise against anyone doing this in future, it would be far easier to drill out the current threads on a pb tank and tap new ones.
JB Threads
-
shud_b_rite
- Specialist 2
- Posts: 290
- Joined: Tue Jan 30, 2007 7:10 pm
- Location: Auckland, New Zealand
Airbeds... so many different uses
Well they're attached.
I would personally think it was a bit too brittle for that kind of thing. Would it crack if the quick release was fixed to a cannon and the paintball tank took a knock? That kind of thing would put stress on the connecting fittings and if it's too brittle then it will crack instead of flexing a little as metal would.
I would personally think it was a bit too brittle for that kind of thing. Would it crack if the quick release was fixed to a cannon and the paintball tank took a knock? That kind of thing would put stress on the connecting fittings and if it's too brittle then it will crack instead of flexing a little as metal would.
-
itwentboom
- Private 4
- Posts: 61
- Joined: Thu Feb 22, 2007 4:36 pm
No it's not that bad at all. I'm just busting balls thats all.