Page 1 of 1
rubber seal for a piston
Posted: Sat Dec 03, 2005 7:36 pm
by aussiecyclist
i was just wondering what type of rubber to seal the barrell everyone uses for their piston, what thickness too...
thanks for the help
Posted: Sun Dec 04, 2005 9:36 am
by drac
If you can find them, neoprene washers work excellently. Don't get the thick ones though, look for ones which are about 1/8 of an inch thick. Don't know how many milimeters that works out to be.
Posted: Sun Dec 04, 2005 3:59 pm
by zaphar
check the home despot, I remember getting some there...
Posted: Sun Dec 04, 2005 5:12 pm
by drac
Do they even have home depots in australia?
Posted: Sun Dec 04, 2005 6:08 pm
by zaphar
Oh, good point
Posted: Mon Dec 05, 2005 7:35 pm
by aussiecyclist
k thanks for that, i'll try the neoprene
no home depot in oz.
we got stores like bunnings, mitre 10, which are just general building suplies stores
Posted: Mon Dec 05, 2005 7:53 pm
by Brian the brain
I use bike (inner tube) tire rubber.
Bolt it onto your piston and cut down to size.
Posted: Fri Dec 09, 2005 1:49 am
by aussiecyclist
thanks for the help guys, went to the locla clark rubber store
got some sheet neoprene 1.5 and 3mm thick
seams to be working great,