Hey everyone I'm new to spudfiles and I'm needing some help. I'm been searching how to model a 1/2 square qev into the ggdt I just can't find any specs to put in there. I'm so close to finish my muzzle loader sniper and I can't wait to show you all. Thanks in advanced.
Edit by Mod (MrCrowley): Topic title nondescript.
How do I model a 1/2" QEV in GGDT?
-
POLAND_SPUD
- Captain
- Posts: 5402
- Joined: Sat Oct 13, 2007 4:43 pm
- Been thanked: 1 time
Set to generic valve
Opening time: close to 2.5 - 5ms
dwell time: 1000ms (tells how long the valve is open - set to 1000ms which is one second)
flow coef - I'd say close to 55% is realistic
can't tell you much about dimensions as I don't have the square one myslef so just grab calipers and measure it yourself
Opening time: close to 2.5 - 5ms
dwell time: 1000ms (tells how long the valve is open - set to 1000ms which is one second)
flow coef - I'd say close to 55% is realistic
can't tell you much about dimensions as I don't have the square one myslef so just grab calipers and measure it yourself
Children are the future
unless we stop them now
unless we stop them now
Thanks Poland_ spud appreciate the help. It's going to use the the semi auto blowgun mod wyz2285 used on his built for combat gun I was just wondering how would you put that in the ggdt or its not necessary. 
sorry for the noob questions
sorry for the noob questions