Stand
Posted: Sat Feb 26, 2005 9:12 pm
<div align="center">STAND
Provided By - Ian2accurate
This is a stand for a cannon, which is able to rotate and move up and down about 120*(degrees sign). The 1" pipe you see running through the cross makes sure the air does not fill the <br>
stand before getting to the projectile. The cross was bored out with a dremel tool, and the pipe was sanded a little to make it go through.
The pipe that 90*'s off on the bottom of the inserted piping leads to 2 tees which are 2 valves for the cannon. It is possible to make a more complex design of this one, which could have supports using 45*'s and such
<img src="http://www.spudfiles.com/official_pics/ ... 6_IMG1.JPG">
<img src="http://www.spudfiles.com/official_pics/ ... 7_IMG2.JPG">
Provided By - Ian2accurate</div>
Provided By - Ian2accurate
This is a stand for a cannon, which is able to rotate and move up and down about 120*(degrees sign). The 1" pipe you see running through the cross makes sure the air does not fill the <br>
stand before getting to the projectile. The cross was bored out with a dremel tool, and the pipe was sanded a little to make it go through.
The pipe that 90*'s off on the bottom of the inserted piping leads to 2 tees which are 2 valves for the cannon. It is possible to make a more complex design of this one, which could have supports using 45*'s and such
<img src="http://www.spudfiles.com/official_pics/ ... 6_IMG1.JPG">
<img src="http://www.spudfiles.com/official_pics/ ... 7_IMG2.JPG">
Provided By - Ian2accurate</div>