This is what i beileve is the final solution to auto fire. How it works is when the air passes through the sprinkler valve and is going through the barrel the "air scoop" will help catch some air and as it passes though the tube and then go into the feeder and pushes the ammo downwards (along with wht should be suction from the air going through the barrel right?) and to the ammo from rolling out could be a small bumb of wht is dried glue,putty or a small dip.(which can be sanded in after teh hole is cut for the feeder)
<a href="http://img528.imageshack.us/my.php?image=newideaml1.png" target="_blank"><img src="http://img528.imageshack.us/img528/6012 ... ml1.th.png" border="0" alt=""></a>
Heres probably a clearer pic when you click on it
<a href="http://img416.imageshack.us/my.php?image=newideazv8.png" target="_blank"><img src="http://img416.imageshack.us/img416/4598 ... zv8.th.png" border="0" alt=""></a>
Questions comments?
THE FINAL SOLUTION><><><>FOR AUTO FIRE
-
zeigs spud
- Corporal 2
- Posts: 657
- Joined: Tue Apr 04, 2006 10:39 pm
How to load-
1-take off fedding tube cap
2-insert ammo
3-close cap (screw on cap)
uhh ammo i kinda explained with the bump and the dip thing but i acualy forgot to mention that behind the feeding tube (where it conects to the barrel) there should be a thin little bar 1-2/10 in. thick to keep ammo from rollling back down the barrel bucuse untill you fire you should keep it at an angle.
OMFG>>>>>>>
lol i rememberd how to keep it form moving (i thought of the idea in 1rst period and didn't really write it down)
omg i am sorry...i'll have to remake the pic. it's basicly all tat but upside down rofl, the ammo was ment to be inserted in within a casing that would only go so far up the feeding tube.
well i hope that explained it. sorry about that.
1-take off fedding tube cap
2-insert ammo
3-close cap (screw on cap)
uhh ammo i kinda explained with the bump and the dip thing but i acualy forgot to mention that behind the feeding tube (where it conects to the barrel) there should be a thin little bar 1-2/10 in. thick to keep ammo from rollling back down the barrel bucuse untill you fire you should keep it at an angle.
OMFG>>>>>>>
lol i rememberd how to keep it form moving (i thought of the idea in 1rst period and didn't really write it down)
omg i am sorry...i'll have to remake the pic. it's basicly all tat but upside down rofl, the ammo was ment to be inserted in within a casing that would only go so far up the feeding tube.
well i hope that explained it. sorry about that.
you would only get about 2-3 of the balls to shoot out of the barrel per shot(i say this because with sprinkler mods ya cant get dbl trigger pushes YOU HAVE TO SHOOT ONCE THEN FILL AND THEN REPEAT) hardly a final solution thatnks anyways, you are better off designing a spring powered piston valve.
Yah, not really auto fire, just use the other method, don't remeber the name. Have a tee, barrel out one side, air ffrom the middle, clip sticks out the back, air sucks ammo into barrel for a few round burst.
"There isn't a problem in the world that can't be solved by the proper application of explosives"
-
saladtossser
- Sergeant 3
- Posts: 1234
- Joined: Sat Mar 26, 2005 10:40 am
- Location: Toronto
- Contact:
Vogt pattern? Bless Chewy for inventing such a simple system.
"whoa... I thought pimpmann was black..."-pyromanic13
-
zeigs spud
- Corporal 2
- Posts: 657
- Joined: Tue Apr 04, 2006 10:39 pm
yeah this gets a few also but mabey more with the air sucking the ammo out and pushing it from behindAtlantis wrote:Yah, not really auto fire, just use the other method, don't remeber the name. Have a tee, barrel out one side, air ffrom the middle, clip sticks out the back, air sucks ammo into barrel for a few round burst.