Does anyone know a good C:B size ratio for pneumatics? I have a copper gun with a 3ft barrel, and about 2.5ft of 3/4 chamber. THe barrel is 1/2. I want more power!
Thanks
Ethan
barrel to chamber size ratio on pneumatics
-
PCGUY
- Owner
- Posts: 1435
- Joined: Wed Aug 18, 2004 10:54 pm
- Location: Illinois
- Has thanked: 2 times
- Been thanked: 26 times
- Contact:
I don't think there is an exact known C:B ratio, but if I was to guess i'd say something like 2:1 or 3:1
Yes, I am the guy that owns & operates SpudFiles (along with our extremely helpful moderators).
-
boilingleadbath
- Staff Sergeant 2
- Posts: 1635
- Joined: Sat Mar 12, 2005 10:35 pm
- Location: Pennsylvania, USA
There is no best chamber:barrel ratio, going either way, for a pnematic. Why?
Because if you have no limmets on chamber size, you want it as big as you can afford.
...Or, if you can't change your chamber size, the optimum length barrel will vary depending apon your operating pressure. I suggest downloading the GGDT.
Because if you have no limmets on chamber size, you want it as big as you can afford.
...Or, if you can't change your chamber size, the optimum length barrel will vary depending apon your operating pressure. I suggest downloading the GGDT.
-
saladtossser
- Sergeant 3
- Posts: 1234
- Joined: Sat Mar 26, 2005 10:40 am
- Location: Toronto
- Contact:
depends on your operating pressure
"whoa... I thought pimpmann was black..."-pyromanic13