finished my airsoft grenade/rocket thing

[covey12]

i finished it and it works, the total cost was about 15 dollars
if you guys want i will put a tutorial on it, heres some vids of me shootin

this is me firing a bb slug shot


this is a paintball slug, but when i pulled the bike pump off the valve alot of the air came out, so the balls didnt all break like normal

ty to all who helped me with the design and ammo

[FordGtMan]

How about a wad of tissue paper? Nothing new, but i would think a coaxial type grenade launcher would look better and have better performance and maybe a popoff valve to make it more like a trigger.

[Cannibal Corpse]

Well i made somthing like this awhile ago exept i took some brass tubing i got from a hobby shop and cut 5in. pieces tape them together and cut slits at the top and bottom of each pipe and put a oring over it so it could hold the bb's in place. And then put them in the barrel witch was 3/4in it work realy well. But honistly just buy a airsoft m203 gernade thier like 50$ and they are realy fun. Cause you can build a launcher for it all you need to do is make a trigger to hit the button on the bottom of the shell. And but it in a tube.

[Davidvaini]

If you are looking for a grenade launcher for airsoft I would highly suggest my Burst disk cartridge design.. I made it for that purpose..

http://www.spudfiles.com/forums/preload ... 14802.html

and here is a link to it used in a panzerschrek I made.

http://www.spudfiles.com/forums/panzers ... 15851.html

As for the launcher itself.. just a pvc pipe attached via rail.

[Dgealy]

A mini coaxial like PVC Arsenal's old m203 would be fun. It's an easy build too. http://www.spudfiles.com/forums/viewtop ... html#33204

[i-will]

i say get rid of the ball valve idea for obvious performance reasons). check out a topic i posted. in it is a design for a grenade type coax. nvermind. here's the pic. it's pretty simple and can be made very small if u want to. it also uses a plug for piloting instead of a schrader. how and where to pressurize it is ur decision. i'm gonna use a fill valve from a lighter so i can use greengas (propane) to get massive presure like airsoft grenades. airsoft is what i'm planning on using it for anyway. AND EVEN THOUGH THE PIC HAS ONE U DON'T NEED A SPRING.

<a href="http://s90.photobucket.com/albums/k273/ ... xshell.jpg" target="_blank"><img src="http://i90.photobucket.com/albums/k273/ ... xshell.jpg" border="0" alt="Photobucket"></a>