barell for airsoft rifle

twizi · Wed Dec 17, 2008 8:19 pm

sorry for the qustion for a 6mm airsoft bb what is the best sized brakline for it i think it 5/16 but im not sure i live far away fram an auto part store so does a ny one now

please say i live 40 miles away from the closest auto parts store please i need the sized pipe

cheeseboy · Wed Dec 17, 2008 8:29 pm

ok, for 6mm airsoft bb's the optimal size is 9/32. 1/4 is to small and 5/16 to big. BUT make sure to take a bb with you as sometimes the brakeline is thicker and the bb won't fit in it anymore.

jonnyboy · Wed Dec 17, 2008 8:31 pm

I think it is 1/4 inch. But I'd recommend you buy a real one online. Brake line is 7 mm so there will be some blow by.

cheeseboy · Wed Dec 17, 2008 8:59 pm

your welcome, just on a side note some people use 1/4 inch brake line as barrels but all that size that I have found don't fit 6mm bb's. Like my new avatar I changed it because someone else had the same kitty

twizi · Wed Dec 17, 2008 9:00 pm

it awsome your new avatar
but the only braklines i found on line were hoses

cheeseboy · Wed Dec 17, 2008 9:29 pm

I think he means a real airsoft barrel

but when I searched brake line on google it was full of steel ones not hoses maybe you mispelled?

IlovePsi · Thu Dec 18, 2008 1:19 pm

alu or brass tubing ehhh_?

Davidvaini · Thu Dec 18, 2008 1:44 pm

http://www.airsoftgi.com/product_info.p ... ts_id=2751
http://www.airsoftgi.com/product_info.p ... ts_id=2189

As always I think brakeline has way too much blowby.