1/4 pvc
-
- Specialist
- Posts: 137
- Joined: Wed Nov 26, 2008 2:18 am
where do you buy 1/4 inch pvc because i do not see any at osh. or is it at home depot... or neither?
- Technician1002
- Captain
- Posts: 5189
- Joined: Sat Apr 04, 2009 11:10 am
At smaller sizes it tends to not have enough structural strength to prevent breakage. Most plumbing applications move to poly tubing for ice makers and such that need small pipe. 1/4 inch brass or iron is common enough and is tough enough to not snap off when bent a little.raptorforce wrote:where do you buy 1/4 inch pvc because i do not see any at osh. or is it at home depot... or neither?
Yep 1/2" is the smallest standard PVC size used in standard plumbing. Go with copper or brass.
What purpose did you have in mind for 1/4" PVC?
What purpose did you have in mind for 1/4" PVC?
- Molybdenum
- Private 2
- Posts: 34
- Joined: Mon May 25, 2009 8:21 am
- Location: Minnesota
You will have a much easier time finding the brakeline, and it works just fine, though odviously inferior to an actual airsoft barrel.
Thanks to the internet, I know everything about everything exept how to actually do anything.