paintball rpg

colty-bear · Sun Jul 12, 2009 10:47 pm

i am currently working on a paintball rpg first made by WOW!! http://www.spudfiles.com/forums/basic-rpg-t6521.html
i am going to make some better adjustments to it i need a cheap 1" sprinkler off spudtech at 13.99$ is that cheapest?
also i am going to have a push button sprinkler pilot
the question is i wanted to hook up a tee run a schrader valve in one a brass nipple to fit my hand then the push button all connected to the sprinkler but someone said if i did that it would fill v e r y s l o w l y so i want to put it in a spot where it is easy to get to but i do not want to machine it directly into the air tank.
any ideas?

thedeathofall · Sun Jul 12, 2009 10:53 pm

Whoa there man... slow down and please use grammer.

$14 for a 1 incher is really good actually. I'm not so sure about shipping though.

Pushbuttons have been used before. They are rather effective actually.

As to your question... I cant understand what you are asking. (due to the lack of grammer as stated above.)

inonickname · Sun Jul 12, 2009 10:54 pm

colty-bear wrote:any ideas?

Yeah, could you retype your post?

I managed to get out of that you don't want to fill from the sprinkler valve pilot and you don't want to fill from the chamber.

Just drill a hole in 2 layers of PVC and tap it into the chamber. Not hard.

And unless you can get an old/second hand sprinkler valve gort's price wouldn't be very easy to beat.

colty-bear · Mon Jul 13, 2009 1:10 am

how would i tap into the tank and it be airtight to 150 psi?
sorry for grammar typed as fast as possible(pecker typer)

i was going to use a pushbutton trigger
1 sprinkler valve to actuate
better?

inonickname · Mon Jul 13, 2009 1:14 am

how would i tap into the tank

With a suitably sized tap.

t be airtight to 150 psi?

With teflon/PTFE tape or pipe dope.

colty-bear · Mon Jul 13, 2009 2:23 pm

i don't understand what you mean by tapping into tank can you explain how to do it?

DinerKid · Mon Jul 13, 2009 2:28 pm

instead of tapping the hole just find fittings. i used threaded fittings for my last cannon so i didn't have to tap into the chamber.

http://www.spudfiles.com/forums/my-newe ... 18686.html

ssgnort · Mon Jul 13, 2009 9:17 pm

here is acouple Ideas for paintball RPG

http://www.spudfiles.com/forums/break-d ... 18189.html

http://www.spudfiles.com/forums/paintba ... 18118.html