Large O-rings
-
clemsonguy1125
- Sergeant 5
- Posts: 1485
- Joined: Tue Jul 21, 2009 4:00 pm
- Location: East Coast
Ok, thanks I'll have to see if I have a local tru value
That is all.
@Tech
What are the dimensions of the 2.5" O-Ring being used?
Need to update my CAD file for your launcher.
What are the dimensions of the 2.5" O-Ring being used?
Need to update my CAD file for your launcher.
-
Technician1002
- Captain
- Posts: 5189
- Joined: Sat Apr 04, 2009 11:10 am
I am not sure at the moment. I'll find out later. I just took a cut piece of pipe to the store and found some that fit.dewey-1 wrote:@Tech
What are the dimensions of the 2.5" O-Ring being used?
Need to update my CAD file for your launcher.
I'll see if I can get a bin number on that ring.-
clemsonguy1125
- Sergeant 5
- Posts: 1485
- Joined: Tue Jul 21, 2009 4:00 pm
- Location: East Coast
UNfortuantly I don't have a local true value so I'll have to find somewhere else
That is all.
-
Technician1002
- Captain
- Posts: 5189
- Joined: Sat Apr 04, 2009 11:10 am
I found the ring package. The o rings in the 2.5 inch QDV are part number 2-330. They are 2-1/2 inches OD, 2-1/4 ID, with a CS of 3/16ths of an inch. They just fit inside the pipe with minimal compression.
Last edited by Technician1002 on Mon Apr 26, 2010 5:39 pm, edited 1 time in total.
That is the size I actually already used on the drawing!Technician1002 wrote:I found the ring package. The o rings in the 2.5 inch QDV are part number 2-330. They are 2-1/2 inches OD, 2-1/4 ID, with a CS of 3/16ths of an inch. The just fit inside the pipe with minimal compression.
Thanks for verifying that number for me.