New Workshop
-
BC Pneumatics
- Sergeant
- Posts: 1053
- Joined: Tue Jan 18, 2005 6:55 pm
- Location: Fresno, CA
- Contact:
Have a rather nice dremel I got last christmas, and I have a large vise as well. Now I need to get a vise to go in the small drill press I just got.
<a href="http://www.bcarms.com/"><img src="http://www.bcarms.com/images/store_logo.png" border="0"> </a>
A vise, of course, everyone needs one I guess. I couldn't work without one.
I made some tools myself, according to my needs. I made for instance some inline holding device, used for welding or soldering, of glueing things together, wich need to be inline. I mean lets say twe pieces of metal pipe need to become 1 big piece of metal pipe. I put the two pieces on to each other and attach the device, to keep them in place.
Anyway, sometimes someone needs a piece of equipment, that just isn't available in the shop, then I build it myself
They offen don't look nice, but they work, and that's the point.
I made some tools myself, according to my needs. I made for instance some inline holding device, used for welding or soldering, of glueing things together, wich need to be inline. I mean lets say twe pieces of metal pipe need to become 1 big piece of metal pipe. I put the two pieces on to each other and attach the device, to keep them in place.
Anyway, sometimes someone needs a piece of equipment, that just isn't available in the shop, then I build it myself
They offen don't look nice, but they work, and that's the point.