Paintball Rifle
-
ShowNoMercy
- Sergeant
- Posts: 1094
- Joined: Mon Mar 19, 2007 8:08 am
- Location: Jersey Bitches!
Qualified with pistol, and yes I got qualified here and USMMA. We have an underground pistol range.
Jesus saves, no need to pray
The gates of pearl have turned to gold
It seems you've lost your way
The gates of pearl have turned to gold
It seems you've lost your way
-
goathunter
- Corporal 2
- Posts: 675
- Joined: Thu Feb 15, 2007 9:20 pm
Qualified with a pistol.Rifles are easy.
Yep, the barrel should work perfect for proball.The last case I got was .686".
To bad you can't find PMI Premium anymore,that used to be the best.
Yep, the barrel should work perfect for proball.The last case I got was .686".
To bad you can't find PMI Premium anymore,that used to be the best.
-
ShowNoMercy
- Sergeant
- Posts: 1094
- Joined: Mon Mar 19, 2007 8:08 am
- Location: Jersey Bitches!
Well I dont have much money and I think I have some of that cpvc laying around so I may try and rifle that stuff. Not sure how but whatever I do it will be an adeventure.
Jesus saves, no need to pray
The gates of pearl have turned to gold
It seems you've lost your way
The gates of pearl have turned to gold
It seems you've lost your way
-
paaiyan
- First Sergeant
- Posts: 2140
- Joined: Wed Dec 27, 2006 10:03 pm
- Location: Central Oklahoma
- Been thanked: 1 time
There was a how-to on rifling pvc around here somewhere. Too lazy to find it at the moment but it shouldn't be too hard for you.
"Who ever said the pen was mightier than the sword, obviously, never encountered automatic weapons."
-General Douglass MacArthur
Read my dog's blog - Life of Kilo
-General Douglass MacArthur
Read my dog's blog - Life of Kilo
-
Darkerweb12
- Specialist
- Posts: 106
- Joined: Sat Aug 20, 2005 10:03 pm
- Location: Madison, Wisconsin
@MrCrowley:Each paintball marker manufacturer has their own custom threads, so finding a match in off the shelf PVC is unlikly.
@ShowNoMercy: I suggest you just get a 3 or 4 foot section of 3/4" PVC, as said before, there may be other types of PVC that have ID's closer to .68"
And rifling or not will have no effect on accuracy, rifling does no good on a spherical projectile as spinning it will only cause it to fly off to the side, same principle of Hop-Up on an airsoft gun, but since you are spinning it perpendicularly to the axis of motion, the higher pressure will be on the side of the Paintball, causing it to be pushed off target.
In short, Rifling = BAD on PB/Airsoft guns.
@ShowNoMercy: I suggest you just get a 3 or 4 foot section of 3/4" PVC, as said before, there may be other types of PVC that have ID's closer to .68"
And rifling or not will have no effect on accuracy, rifling does no good on a spherical projectile as spinning it will only cause it to fly off to the side, same principle of Hop-Up on an airsoft gun, but since you are spinning it perpendicularly to the axis of motion, the higher pressure will be on the side of the Paintball, causing it to be pushed off target.
In short, Rifling = BAD on PB/Airsoft guns.